Subcommittee F17.26 on Olefin Based Pipe
Matching Standards Under the Jurisdiction of F17.26 by Status
- F1533-20 Standard Specification for Deformed Polyethylene (PE) Liner
- -See also WK94480 proposed Revision
- D2737-22 Standard Specification for Polyethylene (PE) Plastic Tubing
- -See also WK92978 proposed Revision
- -See also WK63339 proposed Revision
- D2239-22 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
- -See also WK91998 proposed Revision
- -See also WK63337 proposed Revision
- D3035-22 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
- F714-25 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
- -See also WK89462 proposed Revision
- F876-24b Standard Specification for Crosslinked Polyethylene (PEX) Tubing
- -See also WK92390 proposed Revision
- -See also WK90846 proposed Revision
- -See also WK87487 proposed Revision
- -See also WK91622 proposed Revision
- F894-24 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
- -See also WK93567 proposed Revision
- -See also WK69750 proposed Revision
- -See also WK86306 proposed Reapproval
- -See also WK92546 proposed Revision
- -See also WK92534 proposed Revision
- F1759-97(2024) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
- F2160-22a Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
- F3556-24 Standard Specification for Physical Properties of Polyethylene Corrugated Gravity Flow (non-pressure) Pipe and Fittings with Recycled Content
- -See also WK94558 proposed Revision
- -See also WK92784 proposed Revision
- F3753-25 Standard Classification for Suffixes to the PE Thermoplastic Pipe Material Designation (TPMD) Code for Polyethylene Pressure
- D3485-22 Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
- F2623-24e1 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
- -See also WK92701 proposed Revision
- F2649-14(2023) Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
- F2737-11(2021) Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
- F2769-24 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
- F2788/F2788M-24 Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
- -See also WK93970 proposed Revision
- -See also WK90257 proposed Revision
- -See also WK93258 proposed Revision
- -See also WK92702 proposed Revision
- -See also WK91919 proposed Revision
- F3034-21 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)
- F3123-22 Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
- F3288/F3288M-24 Standard Specification for MRS-Rated Metric- and Inch-sized Crosslinked Polyethylene (PEX) Pressure Pipe
- -See also WK91453 proposed Revision
- -See also WK90271 proposed Reapproval with Editorial Change
- WK78609 Suffixes to the PE Thermoplastic Pipe Material Designation (TPMD) Code for Polyethylene [Pipe and Fittings or Piping]
- F892-95 Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings (Withdrawn 2001)
- D2662-96a Standard Specification for Polybutylene (PB) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter (Withdrawn 2003)
- D2666-96a Standard Specification for Polybutylene (PB) Plastic Tubing (Withdrawn 2005)
- F809/F809M-95e1 Standard Specification for Large Diameter Polybutylene Plastic Pipe (Withdrawn 2006)
- F2736 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe (Withdrawn 2018)
- D2104-03 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010)
- D2447-03 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010)
- D3000-95ae1 Standard Specification for Polybutylene (PB) Plastic Pipe (SDR-PR) Based on Outside Diameter (Withdrawn 2003)
- F2736-13e1 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe (Withdrawn 2018)
- F2987-12(2018) Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications (Withdrawn 2024)