WK3 Steel and Stainless Steel Welded Confinement Elements (WCE) for Concrete and Masonry Reinforcement
WK83 Characterization of Spent Nuclear Fuel in Support of Geologic Repository Disposal
WK320 Documentation of Hygrothermal Models for Moisture Control Design in Building Envelope
WK371 Guide for Use, Benefits and Risks Associated with Just About Right Scales in Sensory Evaluation Testing with Consumers
WK496 Terminology for Fences for Non Residential Outdoor Swimming Pools, Hot Tubs and Spas
WK526 Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh Used in Amusement Rides, Devices, Play Areas, and Attractions
WK753 Reporting Temperature Calibrations
WK933 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
Proposed Revision of
D6348-98
WK964 Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
WK965 Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS).
WK990 Standard Specification for Eye Protective Devices for Airsoft Sports
WK1138 Test Method for Edge Cleaning Performance of Vacuum Cleaners
WK1240 Standard Terminology for Sustainability Relative to the Performance of Buildings
Proposed Revision of
E2114-01
WK1406 Standard Terminology Relating to Thermal Analysis
Proposed Revision of
E473-03
WK1680 Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
WK1902 Standard Test Method for Blast-Resistant Doors
WK1911 Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
WK1994 Standard Test Methods for Chemical Analysis of Hydraulic Cement
Proposed Revision of
C114-03
WK2302 Standard Test Method for
Determination of Setting Time of Concrete by the Temperature Method
WK2450 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
Proposed Revision of
D2121-00
WK2501 STANDARD SPECIFICATION FOR POLYMERIC PILES
WK2509 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions
Proposed Revision of
D2559-03
WK2609 Petrographic Examination of Dimension Stone
WK2915 Standard Specification for Cellulosic Fiber Insulating Board
Proposed Revision of
C208-95(2001)
WK3118 Standard Practice for Determination of Volatile Organic Compound Emission Factors From Spray-Applied Rigid Polyurethane Cellular Plastic Thermal Insulation Using Small Environmental Chambers Under Defined Test Conditions
WK3158 Standard Test Methods for Laboratory Determination of the Density (Unit Weight) of Soil Specimens
WK3458 Helmets Used in Nonmotorized Recreational Water Sports
WK3551 Guide for the Assessment of Demineralized Bone Without Excipient
WK3555 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash Fire Simulations Using an Instrumented Manikin
Proposed Revision of
F1930-00
WK3576 measurement of thickness of coatings over woven scrim
WK3758 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
Proposed Revision of
C921-03a
WK3819 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
Proposed Revision of
C474-02
WK3821 Test Method for Consolidated Drained Triaxial Compression Test for Soils
WK3950 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Corrosive Waste Drainage Systems
WK4052 Determination of Total Phosphorus in Water
WK4102 Standard Practice for Computed Radiology (Photostimulable Luminescence Method)
Proposed Revision of
E2033-99
WK4193 Standard Test Method for the Determination of Turbidity Above 1 TU in the In-Situ Mode
WK4291 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
Proposed Revision of
D6890-03a
WK4345 Standard Terminology Relating to Thermophysical Properties
Proposed Revision of
E1142-97(2003)
WK4448 for Socks and Hosiery
WK4548 Determination of Trace Contaminants in Hydrogen and Related Fuel Cell Feed Gases
WK4863 Mechanical and Functional Characterization of Nucleus Devices
WK4977 Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets-Fast Reactor Fuel
Proposed Revision of
C1008-99
WK5285 Measurement of Normal Incidence Sound Transmission of Materials Based on the Transfer Matrix Method
WK5302 Standard Specification for Stainless Chromium Steel-Clad Plate
Proposed Revision of
A263-03
WK5306 Specification for Stainless Chromium-Nickel Steel-Clad Plate
Proposed Revision of
A264-03
WK5307 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
Proposed Revision of
A265-03
WK5535 Standard Test Method for Cold Bonding Strength of Refractory Mortar
Proposed Revision of
C198-91(2001)
WK5619 Mortars for Historic Masonry
WK5620 Blended Hydraulic Lime for Building Construction
WK5710 /Guide for Friction Measurements of Aerodrome Runways
WK5820 Requirements for testing silver plated conductor for electronic space application
WK5847 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases
WK5935 Process Understanding Related to Pharmaceutical Manufacture and Control
WK5956 Determination of Depth of Penetration of Clear Water Repellents on Concrete, Masonry, And Natural Stone
WK6265 Standard Practice for Application of Floor Polishes to Maintain Linoleum Flooring
WK6399 Mechanically Attached Water-Resistive Barriers
WK6462 Standard Test Method for Radon in Drinking Water (Withdrawn 2008)
Proposed Revision of
D5072-98
WK6504 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
Proposed Revision of
D2665-04a
WK6591 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Proposed Revision of
D624-00e1
WK6749 Fiber Shedding of Paint Roller Covers
WK6755 Testing Fracture of Level Paintbrush Filaments
WK6822 Calibration and Use of Thermocouple Reference Junction Probes in the Evaluation of Electronic Reference Junction Compensation Circuits
WK7020 Practice for Radiological Emergency Response
WK7022 Analysis of Benzene by Gas Chromatography with External Calibration
WK7251 Hydraulically Applied 100% Wood fiber Mulches
WK7252 Hydraulically Applied 100% Cellulose Fiber Mulches
WK7253 Hydraulically Applied Blended Fiber Mulches
WK7490 Standard Guide for Ethical Requirements for Psychophysiological Detection of Deception (PDD) Examiners
Proposed Revision of
E2065-02
WK7523 Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets
Proposed Revision of
C833-01
WK7604 Archiving ITS-Generated Traffic Monitoring Data
WK7642 ANALYSIS OF NICKEL ALLOYS BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY
WK7751 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
Proposed Revision of
D2843-99(2004)e1
WK7774 Building Enclosure System Materials, Assemblies, and Systems
WK7783 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
Proposed Revision of
F876-06
WK7855 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
Proposed Revision of
E90-04
WK7856 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
Proposed Revision of
E492-04
WK7898 Test Method for Measurement of Deformations and Roll Wave Distortion in Heat-Treated Flat Glass
WK7976 Standard Practice for Gas Chromatography Terms and Relationships
Proposed Revision of
E355-96(2001)
WK7991 Standard Guide for the Use of Temperature Block Calibrators
WK7996 Standard Practice for Chemical Protective Clothing Care and Maintenance Instructions
Proposed Revision of
F2061-00
WK8015 WK 8015 Standard Test Method for the Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample By Optical Microscopy
WK8056 Non-Ferrous and Stainless Steel Machine Screws for General Use
WK8079 Standard Guide for ASTM Standards on Playground Surfacing
Proposed Revision of
F2223-04
WK8134 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
Proposed Revision of
F1446-04
WK8279 Standard Terminology Relating to Vascular Stents
WK8281 Standard Practice/Guide for Self Leveling Underlayments
WK8362 Externally Applied Reflective Insulation Systems for Rigid Duct Heating, Ventilation, and Air Conditioning (HVAC) Systems
WK8435 Measuring and Tracking Sensory Descriptive Panel and Assessor Performance
WK8596 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
Proposed Revision of
C1202-97
WK8601 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
Proposed Revision of
E408-71(2002)
WK8631 Standard Practice for On-Site Inspection of Installed Fire Stops
Proposed Revision of
E2174-04
WK8750 Determination of Gas Content of Coal - Direct Desorption Method
WK8778 Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index
Proposed Revision of
E1130-02e1
WK8854 Test Method for Determination of Total Cyanide by Segmented Flow Injection/On-Line Ultraviolet (UV) Digestion-Gas Diffusion with Amperometric Detection
WK8910 Standard Test Method for Measuring the Dynamic Stiffness (DS) of Baseballs and Softballs
WK8919 Standard Practice/Guide for Establishing Standard Values for Reference Cottons
WK8953 Standard Specification for High-Carbon Anti-Friction Bearing Steel
Proposed Revision of
A295/A295M-05
WK8954 Indoor Sports Floor Performance
WK8965 Standard Specification for Fitness Equipment
Proposed Revision of
F2276-05
WK9048 STANDARD CLASSIFICATION FOR LIQUID APPLIED PROTECTIVE COATINGS USED IN SPRAY POLYURETHANE FOAM ROOFING
WK9106 Practice for Minimum Requirements for Accreditation Bodies for Road and Paving Materials Laboratories
WK9121 Assessing the Environmental and Human Health Impacts of New Energetic Compounds1
WK9126 CXXXX Minimum Requirements for Stone Cladding
WK9144 Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
WK9186 Chemical Permeation through Protective Clothing Materials: Testing Data Analysis by Use of a Computer Program
WK9211 Determination of Ammonium, Alkali and Alkaline Earth Metals in Hydrogen and Other Cell Feed Gases by Ion Chromatography
WK9217 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
Proposed Revision of
C231-04
WK9269 Determination of Anions in Coal and Combustion Residue by Oxidative Hydrolysis & Chemically Suppressed Ion Chromatography
WK9301 Standard Terminology for Interventional Pulmonary Devices
WK9302 Standard Test Method for the Critical Stress Intensity Factor and Fracture Tougneness of Graphite
WK9303 Air Oxidation of Carbon and Graphite in the Kinetic Regime
WK9347 Standard Practice for Descriptive Skinfeel Analysis of Creams and Lotions
Proposed Revision of
E1490-03
WK9352 Standard Practice for Conducting a Measurement Systems Analysis
WK9358 Spray Polyurethane Foam (SPF) Used for Roofing Applications
WK9448 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
Proposed Revision of
C335-05a
WK9474 Standard Test Method for Evaluation of Dimensional Stability of Pile Floor Covering
WK9584 Standard Guide for Assessing Potential Hazards of Synthesis Reactions Using Reaction Calorimetry
WK9644 Standard Practice for Sampling Aggregates
Proposed Revision of
D75-03
WK9688 Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
WK9783 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
Proposed Revision of
C591-01
WK9843
Proposed Revision of
WK9863 Personnel Credentialing
WK9866 Test Method for Analysis of Tin-Based Solder Alloys for Lead, Cadmium, Mercury, Antimony and Bismuth (and others) Using Inductively Coupled Plasma Atomic Emission Spectrometry
WK9924 Development of new galling test standard
WK9964 Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure
WK10155 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
Proposed Revision of
D6754-02
WK10156 Standard Classification for Acoustical Ceiling Products
Proposed Revision of
E1264-98(2005)
WK10176 Standard Guide for Preparation of Zinc-Coated (Galvanized) Steel Surfaces for Painting (Withdrawn 2008)
Proposed Revision of
D2092-95(2001)e1
WK10180 Determining the Relative Corrosion Performance of Fasteners in contact with Treated Lumber
WK10189 Standard Practice for Assessing Loss, Damage, or Destruction of Property
Proposed Revision of
E2131-01
WK10193 Recommended Practice for GASKET CONSTANTS FOR BOLTED JOINT DESIGN
WK10195 Standard Practice for Process Compensated Resonant Testing to Determine the Structural Acceptability of Production Parts
WK10196 Determination of Ammonia, Carbon Monoxide, Carbon Dioxide, Formaldehyde,and Trace Water in Hydrogen and Other Gaseous Fuels by Infrared Spectroscopy
WK10202 Standard Test method for Determination of Carbon Tetrachloride and Chloroform in Liquid Chlorine (vaporization technique) by direct injection Gas Chromatography.
WK10209 Test Method for Exposure of Fire Stop Materials to Severe Environmental Conditions.
WK10224 Artists Paint Waste Disposal in Private, Non-Commercial Settings
WK10225 Artists Paint Waste Disposal in Smaller Commercial or Educational Settings
WK10257 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
Proposed Revision of
C794-01
WK10284 Standard Guide for Surveillance for Security Applications
WK10380 Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke
WK10398 Standard Test Method for Determining The Arc Rating Of Face Protective Products
Proposed Revision of
F2178-02
WK10401 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
Proposed Revision of
F1055-98e1
WK10482 Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes
WK10489 Standard for the Design and Employment of a Vehicle Restraint Cable System
WK10531 Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems
WK10741 Determination of Methanol in Propane by Gas Chromatography and Flame Ionization Detection
WK10759 STANDARD TEST METHOD FOR DETERMINING NODULARITY AND NODULE COUNT IN DUCTILE IRON USING IMAGE ANALYSIS
WK10803 To Determine the Dry and Wet Tensile Strength of Hydraulically Applied Fiber Matrix Products
WK10811 Standard Specification for Cork Tile Flooring
WK10816 Standard Test Methods for Security Barriers
WK11009 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
Proposed Revision of
E430-05
WK11012 Standard Terminology for Scientific Cooled CCD Detectors
WK11023 Life and Reliability Testing Based on the Exponential Distribution
WK11163 Standard Practice for Determination of Elements in Airborne Particulate Matter by Inductively Coupled PlasmaMass Spectrometry
WK11165 Specification of Systems for Measuring Sound Pressure Levels
WK11185 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
Proposed Revision of
D4068-01
WK11191 Standard Test Method for Boat Barriers
WK11199 Self-Adhering Air Barrier Materials
WK11200 Test Method for Identification and Quantification of Lead, Mercury, Cadmium, Chromium, and Bromine in Polymeric Material using Energy Dispersive X-ray Spectrometry (EDXRF)
WK11234 Oil Content and Interconnected Porosity of Sintered Powder Metallurgy Products
WK11237 Polyethylene (PE) Corrugated Wall Chambers for Use in Drainage and Wastewater Disposal Absorption Fields
WK11264 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
Proposed Revision of
C361-05e1
WK11312 Determining Argon Concentration in Sealed Insulating Glass Units Using an Argon Gas Analyzer
WK11343 Blast Resistance of Trash Receptacles
WK11377 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
Proposed Revision of
D2846/D2846M-06
WK11390 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
Proposed Revision of
D6281-04
WK11391 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
Proposed Revision of
D5755-03
WK11425 Private Unmanned Aircraft System (UAS) Pilot Practical Test Standards for Unmanned Aircraft Single-Engine Land (SEL) Remote Control and Autonomous/Semiautonomous
WK11446 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
Proposed Revision of
F480-02
WK11447 Determining Nameplate Recovery Rate of Stationary Oil Skimmers Systems.
WK11531 Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester
WK11532 Analysis of In-Service Lubricants Using the On-Site Analyzer (OSA) Integrated Tester
WK11539 Standard Test Method for Lead-210 in Water
WK11541 Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystyrene Thermal Insulation Core Materials
WK11570 Standard Test Method for Analysis of Spent Nuclear Fuel to Determine Selected Isotopes and Estimate Fuel Burnup
WK11585 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
Proposed Revision of
F1743-96(2003)
WK11621 Water System Bio-Sentinel Monitoring for Homeland Security
WK11648 Standard Practice for Characterizing Charged-Particle Irradiations of Materials in Terms of Non-Ionizing Energy Loss (NIEL)
WK11666 Test Method for Dirt Pick Up Resistance (DPR)
WK11705 IN-PLACE DENSITY AND WATER CONTENT BY ELECTRICAL IMPEDANCE SPECTROSCOPY
WK11707 Obtaining Measurements with Articulated Strut Tribometers (AST)
WK11714 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-05a
WK11731 Comparing Sealant Behavior to Reference Photographs
WK11775 Use of Drainage Media with Waterproofing Systems
WK11776 Determining Particle Size Distribution of Soil Using Hydrometer (Sedimentation) or Combined Hydrometer and Sieve Analysis Procedures
WK11781 Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
Proposed Revision of
D7113-05
WK11803 Glass Fiber-Reinforced Thermoplastic Pipe
WK11865 Standard Guide for Testing Coil Coatings (Withdrawn 2009)
Proposed Revision of
D3794-00
WK11869 Standard Guide for Specimen Preparation and Mounting in Surface Analysis
Proposed Revision of
E1078-02
WK11898 On-line Total Organic Carbon (TOC) Method Validation in Pharmaceutical Waters
WK11927 Standard Test Method for the Low Level Determination of Organic Chlorine in Aromatic Hydrocarbons and Related Chemicals by Oxidative Combustion and Microcoulmetry
WK11949 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
Proposed Revision of
B172-01a
WK11951 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
Proposed Revision of
B173-01a
WK11952 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
Proposed Revision of
B174-02
WK11958 Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
WK12001 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
Proposed Revision of
D2290-04
WK12008 Estimating the Function of Gap Junction Intercellular Communications (GJIC) for Detecting the Tumor-Promoting Activity by the Scrape Loading Dye Transfer Assay
WK12031 Standard Test Method for Water Content in LPG by Electronic Moisture Analyzer
WK12052 Evaluating the Under-Deck Fire Test Response of Deck Structures
WK12087 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
Proposed Revision of
C1077-05be1
WK12152 Installation of Mechanical Frame-Chimney Seals in Sanitary Sewer Manholes
WK12215 tandard Test Method for Foaming Characteristics of Lubricating Oils
Proposed Revision of
D892-05
WK12253 Electrofusion-Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing
WK12307 Standard Terminology Relating to Soil, Rock, and Contained Fluids
Proposed Revision of
D653-05
WK12313 Standard Specification for Full Size Baby Crib
Proposed Revision of
F1169-03
WK12351 Determining the Temperature Ratings for Cold Weather Protective Clothing
WK12373 Evaluating the Range Performance of Three-Dimensional (3D) Imaging Systems
WK12395 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine
Proposed Revision of
D2979-01
WK12508 Standard Test Method for Measurement of Oxidation-Reduction Potential (Redox) of Soils
WK12512 Flow Rate of Metal Powders Using the Carney Funnel
WK12551 Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
Proposed Revision of
E477-06a
WK12596 Standard Practice for Installation of Vulcanizable Rubber Tank Linings and Pipe Linings
WK12615 Condition Assessment Program Approaches
WK12677 Standard Test Method for Determining the Pressure Drop of a Gas Flowing Through a Bed of Granular Activated Carbon
WK12731 Standard Guide for Composing Walkway Surface Evaluation and Incident Report Forms for Slips, Stumbles, Trips and Falls
Proposed Revision of
F1694-96(2004)
WK12744 Flexible Aerogel Thermal Insulation
WK12759 Acoustic Emission Examination of Plate-Like and Flat Panel Composite Structures Used in Aerospace Applications
WK12790 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
Proposed Revision of
F1869-04
WK12794 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-04
WK12802 Adhered Manufactured Stone Masonry Veneer (AMSMV) Units
WK12844 Standard Specification for Paintball Markers (Limited Modes)
Proposed Revision of
F2272-03
WK12876 Determination of Specific Heat Capacity by Modulated Temperature Differential Scanning Calorimetry
WK12892 Standard Guide for Process Sampling
WK12951 Standard Test Method for Isotopic Uranium in Water by Radiochemistry
Proposed Revision of
D3972-02
WK12964 Blended Supplementary Cementitious Materials
WK12969 Standard Consumer Safety Specification for Infant Bath Tubs
WK13012 MFDD Multi Functioal Distribution Device
WK13028 Behavior of Materials in a Vertical Tube Furnace at 750C with a Cone-Shaped Airflow Stabilizer
WK13074 Standard Test Method for Crash Testing of Low Speed Pedestrian Barriers
WK13188 Guide for Standard Guide for interpretation of mass spectral data acquired with ToF-SIMS
WK13191 Radiologic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
WK13211 Standard Test Method for the Determination of Hydrocarbons and Inerts in Gaseous Mixtures by Gas Chromatography
WK13229 Determination of Hydraulically Applied Erosion Control Product (HECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
WK13250 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
Proposed Revision of
D5930-01
WK13360 Open Time of Latex Paints
WK13380 Steel Castings Sampling
WK13402 Vertical Strip Drains Using a Large-Scale Consolidation Test
WK13403 Required Product Information to be Provided with an Airplane
WK13409 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
Proposed Revision of
D3835-02
WK13438 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene-Vinyl Acetate (EVA) Copolymers By Gas Chromatography
Proposed Revision of
D4275-02
WK13473 Conversion of Cut Point Weight Intervals to Cut Point Volume Intervals of Crude Oils
WK13488 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
Proposed Revision of
F2435-05
WK13594 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
Proposed Revision of
D2619-95(2002)e1
WK13650 Evaluating Viscoelasticity of Tissue Engineered Cartilage using Noninvasive Photo- Acoustic Method
WK13659 Test Evaluation Procedures for Coating QualificationIntended for Use on High-Strength Structural Bolts
WK13674 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
Proposed Revision of
C667-01
WK13687 Characterization of Hydrolytically Degraded of Poly(caprolactone) Scaffolds for Tissue Engineering
WK13688 Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations
WK13689 Standard Test Method for Permeability of Granular Soils (Constant Head)
Proposed Revision of
D2434-68(2006)
WK13713 Standard Test Methods for Fire Tests of Building Construction and Materials
Proposed Revision of
E119-05a
WK13764 Determining the Drainage Efficiency of A Wall System When a Scratch Coat of Mortar is Part of the Wall System
WK13854 Standard Specification for Grout for Masonry
Proposed Revision of
C476-07
WK13914 Extraction of Aqueous Cyanides from Mine Rock and Soil After Remediation of Process Releases
WK13915 Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a semi-automated apparatus
WK13922 Fire Tests under Exposure Conditions Different than ASTM Test Method E 119
WK13935 title
WK13946 Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-Ray Tubes
WK13962 Test Method for Determination of Total Organic Carbon in Water by High Temperature Combustion IR Detection
WK13995 Standard Performance Specification for Men's and Boys' Woven Coverall, Dungaree, Overall, and Shop-Coat Fabrics
Proposed Revision of
D4109-02
WK14106 Standard Test Method for Sampling and Testing Grout
Proposed Revision of
C1019-07
WK14169 Standard Test Method for Liquid Penetrant Examination
Proposed Revision of
E165-02
WK14186 the Continuous Determination of Dissolved Ozone Concentration
WK14245 Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
WK14247 Air-Fed Protective Ensembles
WK14251 Including an Occupational Exposure Guideline in a Consensus-based Occupational Safety and Health Standard
WK14256 Geogrid Junction Strength
WK14271 Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods
WK14302 Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction
Proposed Revision of
D946-82(2005)
WK14361 Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
WK14362 Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness
WK14405 Terminology Relating to Thermometry and Hydrometry
Proposed Revision of
E344-06
WK14410 Temporary Fences
WK14411 Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
WK14412 12- to 30-in. [300- to 750-mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
WK14437 Evaluating the Performance of Radio (Wireless) Communication Links used for the Control and Telemetry Systems on Urban Search and Rescue Robots
WK14502 Standard Specification for Tub and Shower Enclosures
WK14525 Polyolefin Sheet Floor Covering with Backing
WK14545 Standard Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System
Proposed Revision of
C1493-01
WK14565 Standard Consumer Safety Performance Specification for Home Playground Equipment
Proposed Revision of
F1148-05
WK14590 Terminology Related to Paint Application Tools
WK14671 Evaluating Adhesives Used in End-Jointed Lumber When Exposed to Elevated Temperature
WK14688 Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment
WK14697 Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)
Proposed Revision of
F1862-07
WK14701 Symbolizing Adhesive Applications
WK14711 managing non-conforming coatings inside Service Level I
WK14724 Standard Specification for Coded Values Used in the Electronic Health Record
Proposed Revision of
E1633-02a
WK14727 Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use
Proposed Revision of
F1411-01(2006)
WK14728 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
Proposed Revision of
D6956-03
WK14820 Calibration of Fixed-Cell Differential Scanning Calorimeters
WK14899 Determination of Firmness and Stability for the Accessibility of Surface Systems Under and Around Playground Equipment Using a Rotational Penetrometer
WK14905 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
Proposed Revision of
D5917-02
WK14917 Standard Practice for Identification Marking of Aluminum and Magnesium Products
Proposed Revision of
B666/B666M-01
WK14950 Guide for Endovascular device trackability and pushability.
WK14955 Modified Stub ACME Thread Joint with Elastomeric Seal
WK14956 Temporary Protective Equi-Potential Bond Mat To Be Used On De-Enegergized Equipment
WK14961 Standard Specification for Pedestrian and Light Traffic Paving Brick
Proposed Revision of
C902-07
WK14976 Flexible Polypropylene Reinforced (fPP-R)and nonreinforced(fPP) Geomembranes
WK14977 Specification for Polypropylene (PP) Corrugated Pipe and Corrugated Dual Wal PP Pipe (4
WK14992 Standard Guide for Selection and Use of Flat Strapping Materials
Proposed Revision of
D4675-06e1
WK14993 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
Proposed Revision of
D3950-06e1
WK15012 Standard Specification for Glazed Brick (Single Fired, Brick Units)
Proposed Revision of
C1405-07
WK15082 Measuring the Asperity Height of Textured Geomembrane
WK15083 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography
Proposed Revision of
D4735-02
WK15107 Test Method for Determining Snapping Pressure of Snap Fasteners
WK15211 Determination of Nonylphenol, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
WK15217 Test Method for Hexane/Ether Extract in Wet Blue or Fats and Oils in Wet Blue
WK15225 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
Proposed Revision of
D3261-03
WK15226 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
Proposed Revision of
D2683-04
WK15229 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
Proposed Revision of
E779-03
WK15249 Zinc Thermo Diffusion Galvanization (TDG) Coatings on Steel Fasteners, Hardware, and Other Products
WK15252 Standard Guide for Prefabricated Panel Insulation Systems for Ducts and Equipment Operating at Temperatures Above Ambient Air
Proposed Revision of
C1146-96(2003)
WK15262 Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
WK15286 Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval
WK15291
WK15321 Collection of Integrated Samples for the Specification of Biomass (Biogenic) and Greenhouse (Anthropogenic) Carbon Dioxide Emitted from Stationary Emissions Sources
WK15324 Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure.
WK15351 Constant Air Inflatable Play Devices for Home Use
WK15385 Practice for Practice for Data Characteristic of Property, Equipment, and Asset Records
WK15388 Standard Specification for Retroreflective Sheeting for Traffic Control
Proposed Revision of
D4956-07
WK15390 Standard Practice for Deterioration of Geotextiles from Outdoor Exposure
Proposed Revision of
D5970-96(2002)
WK15434 Test Method for Analysis of Tin-based Solder Alloys Using Optical Emission Spectrometry
WK15452 Specification for Pneumatically applied high temperature fiber thermal insulation for industrial applications
WK15462 Accelerated Corrosion for Mechanical Fasteners
WK15467 Standard Terminology Relating to Concrete and Concrete Aggregates
Proposed Revision of
C125-07
WK15520 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
Proposed Revision of
E1996-06
WK15532 Assessment of Contamination and Residues on Medical Devices
WK15535 Rotational Capacity Testing of Plain or Coated Bolt, Nut and Washer Assemblies
WK15538 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
Proposed Revision of
F1866-05
WK15556 Specification for Specification for Seamless Copper Tube (RS) Residential Service
WK15563 Specification for Specification for Protective Clothing to be Used against Chemotherapy Drugs
WK15569 Standard Practice for Operating Salt Spray (Fog) Apparatus
Proposed Revision of
B117-07
WK15643 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
Proposed Revision of
A307-04e1
WK15656 Standard Specification for General Requirements for Copper Alloy Castings
Proposed Revision of
B824-04
WK15667 Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
WK15699 Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft
Proposed Revision of
F2339-06
WK15701 Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications
Proposed Revision of
F2347-03
WK15705 Standard Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires
Proposed Revision of
F762-94(2000)e1
WK15710 Measurement of Camber, Cast, Helix(Camber Offset), and Direction of Helix of Coiled Wire
WK15716 Standard Safety Specification for Chests, Door Chests, and Dressers
Proposed Revision of
F2057-04
WK15717 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems
Proposed Revision of
C1397-05
WK15737 Standard Test Method for Pressure and Rate of Pressure Rise for Combustible Dusts
Proposed Revision of
E1226-05
WK15755 Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial and Structural, Produced by the Twin-Roll Casting Process
Proposed Revision of
A1039/A1039M-04
WK15778 Guide for Science-based and Risk-based Cleaning Process Development and Validation
WK15789 Practice for Design and Construction of Porous Asphalt Pavements for Stormwater Management
WK15794 Practice for Freeze Thaw Stability of Waterbased Inks and Ink Vehicles
WK15795 Practice for Accelerated Storage Stability of Liquid Inks and Ink Vehicles
WK15810 Standard Practice for Particle Identification by Analytical Ferrography for In-Service Lubricants Using Optical Microscopy
WK15812 Test Methods for Determination of Trace Elements in Graphite by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP OES) and Electrothermal Vaporization-ICP OES (ETV-ICP OES)
WK15822 Test Specifications for Characterizing Performance Properties of Synthetic Turf Systems
WK15840 Determination of the Amount of Polypropylene (PP) in PP/Low-Density Polyethylene (LDPE) Mixtures Using Infrared Spectrophotometer (FTIR)
WK15864 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
Proposed Revision of
D2420-07
WK15888 Standard Practice for the Collection of Samples of Filterable and Nonfilterable Matter in Water
Proposed Revision of
D6301-03
WK15919 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
Proposed Revision of
C348-02
WK15920 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
Proposed Revision of
C349-02
WK15922 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars(Using 2-in. or [50-mm] Cube Specimens)
Proposed Revision of
C109/C109M-05
WK15927 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load
Proposed Revision of
D5780-95(2002)
WK15930 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
Proposed Revision of
D4659-03
WK15932 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates
Proposed Revision of
D4661-03
WK15940 Test Method for Determining Tribological Properties of Grease Lubricated Plastic Socket Suspension Joints Using A High-Frequency, Linear-Oscillation (SRV) Test Machine1
WK15943 Test Method for The Analysis of Ethylbenzene using Capillary Column Gas Chromatography and External Standardization
WK15944 Standard Specification for Ethylbenzene
Proposed Revision of
D3193-96(2003)
WK15959 Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
Proposed Revision of
D1754-97(2002)
WK15971 Standard Terminology of Structural Clay Products
Proposed Revision of
C43-06
WK16000 Practice for Heat Aging of Oxidatively Degradable Plastics: Pre-Conditioning for Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
WK16004 RISK-BASED REMEDY SELECTION
WK16014 Test Method for Measurement of Cumulative Permeation of Toxic Industrial Chemicals through Protective Clothing Materials
WK16021 Practice for Testing the Relationship Between Two Sets of Numbers to Determine if that Relationship Includes a Statistically-Significant Amount of Non-Linearity
WK16035 Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers
Proposed Revision of
C1433-07
WK16036 Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric]
Proposed Revision of
C1433M-07
WK16044 Biological Decontamination Procedures on Viral Contaminated Air Permeable Material
WK16104 CONSTRUCTION OF ASPHALT-RUBBER CAPE SEAL
WK16109 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
Proposed Revision of
F1055-98(2006)
WK16159 Standard Test Method for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor
Proposed Revision of
D7203-06e1
WK16161 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
Proposed Revision of
D4541-02
WK16162 Standard Test Method for Acceptance by Performance Testing of U.S. Standard Test Sieves
Proposed Revision of
E2427-05
WK16168 Specification for Eretmocerus eremicus Rose and Zolnerowich (Hymenoptera: Aphelinidae))
WK16193 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
Proposed Revision of
C1550-05
WK16252 Guide for Resource Management in Emergency Management and Homeland Security
WK16253 Standard Test Method for Color Measurement of Flax Fiber
Proposed Revision of
D6961-03
WK16254 Standard Test Method for Assessing Clean Flax Fiber Fineness
Proposed Revision of
D7025-04ae1
WK16255 Standard Test Method for Measurement of Shives in Retted Flax
Proposed Revision of
D7076-05
WK16262 Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
Proposed Revision of
D5540-94a(2003)
WK16281 Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
Proposed Revision of
A906/A906M-02
WK16282 Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
Proposed Revision of
A952/A952M-02
WK16324 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
Proposed Revision of
F2648/F2648M-07
WK16326 Hydraulically Applied Erosion Control Products (HECP)
WK16328 Preparing Samples of Hydraulically Applied Fiber Matrix Products for Index Property Testing
WK16329 To Determine Degredation of Hydraulically Applied Fiber Matrix Products
WK16331 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
Proposed Revision of
B331-95(2002)
WK16355 Standard Test Method for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Chemically Suppressed Ion Chromatography
Proposed Revision of
D6581-00(2005)
WK16386 Standard Consumer Safety Specification for Infant Swings
Proposed Revision of
F2088-03
WK16413 Digital Detector Array (DDA) Performance Evaluation and Long-Term Stability
WK16466 Moisture Retention Curves of Porous Building Materials Using Pressure Plates
WK16495 DRAFT STANDARD SPECIFICATION FOR BITUMINOUS EMULSION COLD-POUR JOINT AND CRACK SEALANTS, FOR ASPHALTIC PAVEMENTS
WK16517 Standard Specification for Natural Cement
Proposed Revision of
C10-06
WK16518 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
Proposed Revision of
F876-06
WK16539 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
Proposed Revision of
F1216-07b
WK16544 MEASURING EMISSIONS OF VOLATILE ORGANIC COMPOUNDS FROM FLOORING PRODUCTS SUCH AS CARPET USING SMALL SCALE ENVIRONMENTAL CHAMBERS
WK16583 Standard Test Methods for Calcium and Magnesium In Water
Proposed Revision of
D511-03
WK16596 Standard Test Method for Slump of Hydraulic-Cement Concrete
Proposed Revision of
C143/C143M-05a
WK16599 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
Proposed Revision of
D5848-05
WK16650 Test Method for Determining Interlayer Adhesion of Ultraviolet (UV) Graphic Screen Printed Inks
WK16679 Cannibalization/Reclamation of Serviceable Equipment Components to Support Demand Requirements
WK16682 Standard Specification for Carburizing Steels for Anti-Friction Bearings
Proposed Revision of
A534-04
WK16700 Evaluating the Dry-Through Time of Traffic Paints
WK16769 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
Proposed Revision of
C535-03e1
WK16775 Specification for Specification for CPT (Copolymers of Chlorotrifluoroethylene, Perfluoroalkoxy, and Tetrafluoroethylene) Plastics
WK16776 EFEP (Copolymers of Ethylene, Tetrafluoroethylene, and Hexalfuoropropylene) Plastics
WK16851 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
Proposed Revision of
C1005-05
WK16854 Test Method for Measuring the Energy Absorption Properties of Polymer Matrix Composites Using the Flat Coupon Crush Method
WK16876 Radial Light Vehicle Aged Tire Durability Test Standard
WK16878 Standard Guide for Evaluating Chemical Protective Clothing
Proposed Revision of
F1296-03
WK16881 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
Proposed Revision of
F1970-05
WK16883 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
Proposed Revision of
E740-03
WK16885 Test Method for Density and Void Content of Pervious Concrete
WK16899 Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
Proposed Revision of
D5987-96(2002)
WK16903 Standard Test Methods for Cone Penetration of Lubricating Grease
Proposed Revision of
D217-02
WK16904 Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
Proposed Revision of
D1403-02
WK16908 Standard Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings
Proposed Revision of
F1616-95(2002)
WK16909 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
Proposed Revision of
C1567-07
WK16953 Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
Proposed Revision of
A688/A688M-04
WK16955 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
Proposed Revision of
A213/A213M-07
WK16958 Fluid-Applied Air Barrier Materials
WK16965 Standard Practice for An Object-Oriented Model for Registration, Admitting, Discharge, and Transfer (RADT) Functions in Computer-Based Patient Record Systems
Proposed Revision of
E1715-01
WK16966 Standard Practice for Rating-Scale Measures Relevant to the Electronic Health Record
Proposed Revision of
E2171-02
WK16973 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates
Proposed Revision of
E1706-05
WK16974 Standard Practice for Physical Inventory of Durable, Moveable Property
Proposed Revision of
E2132-01(2007)
WK16987 the Replication and Measurement of Concrete Surface Profiles sing Replica Putty
WK16989 Standard Terminology Relating to Radiation Measurements and Dosimetry
Proposed Revision of
E170-05
WK17007 On-Line and In-Line Measurement of Turbidity Greater than 1.0 TU in Water
WK17046 Polyurethane Raw Materials: Cup Foam Test for Polyurethane Foam Formulations
WK17049 Examination of Hardened Concrete Using Scanning Electron Microscopy
WK17062 establishing highway equivalent test severity for a radial passenger and light truck tire when testing on a 1.707-m (67.23-in.) rotating dynamometer wheel (roadwheel
WK17085 Guide for Guidance for evaluation and characterization of ultra-high molecular weight polyethylene (UHMWPE)in orthopaedic and spinal devices
WK17092 Manufacture of Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
WK17093 Construction and Testing of Autoclaved Aerated Concrete Masonry
WK17096 Standard Test Method for Pressure Testing Vapor Protective Ensembles
Proposed Revision of
F1052-97(2002)
WK17116 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
Proposed Revision of
F891-04
WK17125 Test Method for determining of fuel filter blocking potential of biodiesel (B100) blend stock by cold soak laboratory filtration
WK17151 Test Method for Evaluating the Thermal EMF Properties of Thermocouple Connectors
WK17168 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
Proposed Revision of
B247-02a
WK17169 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
Proposed Revision of
B247M-02a
WK17172 Pilots Operating Handbook (POH) for Light Sport Aircraft
WK17235 Determination of Water Sorption of Concrete
WK17240 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
Proposed Revision of
A240/A240m-07e1
WK17250 Guide for selection criteria for reels for oil spill control barriers
WK17261 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
Proposed Revision of
C1303-07
WK17265 Pull-Off Strength for Fiber-Reinforced Polymer Composites Bonded to Concrete Substrate
WK17279 Standard Test Method for Autoclave Expansion of Hydraulic Cement
Proposed Revision of
C151-05
WK17280 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
Proposed Revision of
D2992-06
WK17302 Ignition Sources for Upholstery
WK17303 Standard Specification for Welded Stainless Steel Mechanical Tubing
Proposed Revision of
A554-03
WK17330 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
Proposed Revision of
E2368-04e1
WK17336 CORRELATIONS OF MU VALUES OF CONTINUOUS FRICTION MEASUREMENT EQUIPMENT TO DETERMINE MAINTENANCE LEVELS FOR USE AT AIRPORTS
WK17352 Standard Specification for Aluminum-Alloy Sand Castings
Proposed Revision of
B26/B26M-05
WK17397 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
Proposed Revision of
B565-04
WK17404 Standard Guide for Inspection of Amusement Rides and Devices
Proposed Revision of
F893-05a
WK17409 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments
Proposed Revision of
F1839-01(2007)
WK17410 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
Proposed Revision of
G147-02
WK17412 Standard Practice for Maintenance Procedures for Amusement Rides and Devices
Proposed Revision of
F853-05
WK17414 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
Proposed Revision of
D2774-04e1
WK17419 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
Proposed Revision of
C1007-04
WK17420 Standard Specification for Application of Gypsum Sheathing
Proposed Revision of
C1280-04
WK17435 Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-Ray Computed Tomography (CT) Test Methods
WK17436 Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods
WK17439 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-07e1
WK17442 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
Proposed Revision of
B648-78(2006)
WK17443 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
Proposed Revision of
B241/B241M-02
WK17444 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
Proposed Revision of
B429/B429M-06
WK17449 Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications
Proposed Revision of
D2565-99
WK17454 In-Vivo Arterial Deformations and Cycles
WK17459 Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial and Structural, Produced by the Twin-Roll Casting Process
Proposed Revision of
A1039/A1039M-04
WK17461 Evaluating End-Jointed Lumber Studs When Exposed to Elevated Temperature
WK17502 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
Proposed Revision of
B212-99(2006)
WK17508 Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
Proposed Revision of
D5085-02
WK17523 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Young's Modulus
Proposed Revision of
C769-98(2005)
WK17524 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
Proposed Revision of
D3201-07
WK17530 Standard Specification for Evaluation of Structural Composite Lumber Products
Proposed Revision of
D5456-07
WK17531 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
Proposed Revision of
D5516-03
WK17533 Pre-Clinical in vivo Evaluation of Spinal Fusion
WK17534 Standard Test Methods for Evaluating Design and Performance Characteristics of Elliptical Trainers
WK17540 Standard Test Methods for Separation of Asphalt into Four Fractions
Proposed Revision of
D4124-01
WK17541 Standard Specification for Zirconium and Zirconium Alloy Forgings
Proposed Revision of
B493-01(2003)
WK17545 Standard Classification System for Specifying Plastic Materials
Proposed Revision of
D4000-07
WK17562 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
Proposed Revision of
D3950-07
WK17563 Low-Flow Purging and Sampling by Bladder Pump of Ground-Water Monitoring Wells and Devices Associated with Waste Management Activities
WK17565 Demand Wettability of Clothing Materials
WK17571 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
Proposed Revision of
D4595-05
WK17574 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
Proposed Revision of
F949-06a
WK17576 Standard Test Method for Weight Loss of Plasticizers on Heating
Proposed Withdrawal of
D2288-97(2001)
WK17580 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
Proposed Revision of
F1735-02e1
WK17587 Standard Specification for Aluminum-Alloy Investment Castings
Proposed Revision of
B618/B618M-07
WK17588 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
Proposed Revision of
E2102-04a
WK17590 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-07
WK17591 Standard Practice for Quality Assurance in the Manufacture of Fixed Wing Light Sport Aircraft
Proposed Revision of
F2279-06
WK17593 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-07
WK17600 Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Field-Based Extraction and Fluorescence Detection
WK17601 Standard Test Method for the Determination of Gold in Activated Carbon by Fire Assay Gravimetry
Proposed Revision of
E1568-03
WK17604 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
Proposed Revision of
C836-06
WK17605
WK17606 Field Permeability of Pervious Concrete Pavements
WK17609 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course
Proposed Revision of
C898-01
WK17613 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
Proposed Revision of
C957-06
WK17614 Determination of Total Volatile Sulfur in Gaseous Hydrocarbons such as Liquefied Petroleum Gas (LPG)and Liquefied Natural Gas (LNG) by Ultravioley Fluorescence
WK17615 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
Proposed Revision of
C1127-01
WK17617 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
Proposed Revision of
C1471-05
WK17618 Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
Proposed Revision of
C1522-05
WK17621 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
Proposed Revision of
D2042-01
WK17622 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
Proposed Revision of
D5546-01
WK17626 Quantifying the Spread Area of Cells on a Material Substrate
WK17630 Standard Specification for Stainless Anti-Friction Bearing Steel
Proposed Revision of
A756-94(2001)
WK17635 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
Proposed Revision of
F1216-07b
WK17636 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
Proposed Revision of
F1743-96(2003)
WK17637 Physical Identification of Entity Controlled Equipment
WK17639 the Analysis of Water-Soluble Nitrite in Hardened Concrete
WK17642 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
Proposed Revision of
D7372-07
WK17645 Standard Specification for Medium Carbon Anti-Friction Bearing Steel
Proposed Revision of
A866-01
WK17646 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-07
WK17648 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
Proposed Revision of
D3387-83(2003)
WK17659 Precast Concrete Products Used for Stormwater Management
WK17663 Hydraulic Capacity Evaluation of Hydrodynamic Separators and Underground Settling Devices
WK17665 Assessment of Suspended Solids Removal Efficiency of Hydrodynamic Separators and Underground Settling Devices
WK17670 Standard Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC) Test Fixture
Proposed Revision of
D6641/D6641M-01e1
WK17672 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
Proposed Revision of
A193/A193M-07
WK17677 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
Proposed Revision of
D7229-06
WK17678 Standard Specification for Performance of Materials Used in Medical Face Masks
Proposed Revision of
F2100-07
WK17679 Defining Movements, Shipments, and Transfers of Assets
WK17681 Tooling Identification
WK17697 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Proposed Revision of
A370-07a
WK17701 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
Proposed Revision of
D5106-03
WK17716 Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
Proposed Revision of
B349/B349M-03
WK17730 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products
Proposed Revision of
D5116-06
WK17739 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
Proposed Revision of
F2026-07e1
WK17747 Minimum Geospatial Data for Underground Coal Mining Extents
WK17748 Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
WK17751 Determining Biodegradation of Plastic Materials in the Marine Environment by Open System Aquarium Incubations
WK17758 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
Proposed Revision of
F1470-02
WK17759 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
Proposed Revision of
F788/F788M-06
WK17763 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
Proposed Revision of
E2110-03
WK17764 Standard Specification for High Voltage Detectors—Part 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC
Proposed Revision of
F1796-97(2002)
WK17765 Standard Test Method for Normal Consistency of Hydraulic Cement
Proposed Revision of
C187-04
WK17768 Standard Test Method for Shrinkage Factors of Soils by the Wax Method
Proposed Revision of
D4943-02
WK17769 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
Proposed Revision of
D787-96(2003)
WK17770 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles
Proposed Revision of
E2061-06
WK17773 Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
Proposed Revision of
D4566-05e1
WK17784 Construction, Acceptance and Maintenance of Transparencies
WK17785 qualifying all acrylic heated windshields
WK17786 Standard Test Method for Residue of Specified Penetration
Proposed Revision of
D243-02
WK17787 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
Proposed Revision of
A760/A760M-06
WK17790 Concrete Floor Tile
WK17791 Guide for Installation Methods for Concrete Floor Tile Products
WK17794 Standard Terminology for Paint, Related Coatings, Materials, and Applications
Proposed Revision of
D16-07
WK17797 Human Impact on commercial skylights
WK17817 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
Proposed Withdrawal of
D2287-96(2001)
WK17830 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
Proposed Revision of
E648-06a
WK17833 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
Proposed Revision of
C305-06
WK17835 High Shear Mixing of Hydraulic Cement Pastes
WK17836 Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
WK17840 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
Proposed Revision of
D2726-05a
WK17843 Copper Clad Steel Wire in Tracer Wire Applications
WK17849 Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings
Proposed Revision of
E2030-07
WK17850 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility
Proposed Revision of
D6150-97(2003)
WK17852 Standard Specification for Synthetic Surfaced Running Tracks
Proposed Revision of
F2157-02
WK17855 Standard Reference Digital Images for Investment Steel Castings for Aerospace Applications
WK17889 Standard Terminology Relating to Thermal Insulation
Proposed Revision of
C168-05a
WK17895 Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
WK17903 Standard Specification for Roof and Rock Bolts and Accessories
Proposed Revision of
F432-04
WK17912 Automatic Particle Counting below 4 microns in Lubricating and Hydraulic Fluids
WK17913 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
Proposed Revision of
B740-02
WK17916 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
Proposed Revision of
D3948-07
WK17918 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
Proposed Revision of
D7224-07
WK17919 THE USE OF COAL COMBUSTION PRODUCTS FOR UNDERGROUND MINE FILL
WK17922 Standard Test Method for Penetration Resistance of Hardened Concrete
Proposed Revision of
C803/C803M-03
WK17924 Standard Terminology Relating to Sensory Evaluation of Materials and Products
Proposed Revision of
E253-07a
WK17943 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
Proposed Revision of
D2983-04a
WK17949 Standard Specification for Paintball Marker Barrel Blocking Devices
Proposed Revision of
F2271-03
WK17961 Standard Practice for Paintball Field Operation
Proposed Revision of
F1777-02
WK17962 Standard Guide for Installation of Paintball Barrier Netting
Proposed Revision of
F2184-02
WK17964 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
Proposed Revision of
G113-06
WK17968 Transfilling of CO2 Cylinders for use in Paintball Activities
WK17969 Filling of High Pressure Compressed Gas Systems for Paintball (Not charged with CO2)
WK17973 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
Proposed Revision of
F381-06
WK17974 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
Proposed Revision of
F381-06
WK17976 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
Proposed Revision of
F381-06
WK17977 Standard Safety Specification for Consumer Trampoline Enclosures
Proposed Revision of
F2225-06
WK17978 STANDARD PRACTICE FOR MANUFACTURING QUALITY CONTROL OF CONSUMER TRAMPOLINE BED MATERIAL
WK17979 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
Proposed Revision of
F381-06
WK17991 Standard Specification for Paintballs Used in the Sport of Paintball
Proposed Revision of
F1979-04
WK17992 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
Proposed Revision of
D3666-07a
WK17993 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
Proposed Revision of
D5168-03
WK17994 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing
Proposed Revision of
E329-07a
WK17995 Conducting Strength Tests of Masonry Wall Panels
WK17996 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
Proposed Revision of
D882-02
WK17997 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
Proposed Revision of
D1004-07
WK17998 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
Proposed Revision of
D1204-07
WK17999 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
Proposed Revision of
D1709-04
WK18000 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
Proposed Revision of
D1894-06
WK18001 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
Proposed Revision of
D1922-06a
WK18002 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
Proposed Revision of
D1938-06
WK18003 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
Proposed Revision of
D2578-04a
WK18004 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
Proposed Revision of
D2582-07
WK18005 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
Proposed Revision of
D2732-03
WK18006 Standard Test Method for Rigidity of Polyolefin Film and Sheeting
Proposed Revision of
D2923-06
WK18007 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
Proposed Revision of
D3354-04
WK18008 Standard Test Method for Pendulum Impact Resistance of Plastic Film
Proposed Revision of
D3420-95(2002)
WK18009 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
Proposed Revision of
D4272-03
WK18013 Performance of Mechanical Keylock Cylinders
WK18014 Induction Cooktops, Counter or Drop-in mounted.
WK18015 Standard Specification for Portland Cement
Proposed Revision of
C150-07
WK18016 Standard Specification for Portland Cement
Proposed Revision of
C150-07
WK18018 Standard Specification for Nuclear-Grade Aluminum Oxide Pellets (Withdrawn 2002)
C785-93e1
WK18019 Standard Specification for Nuclear-Grade Zirconium Oxide Powder (Withdrawn 1994)
C1065-93
WK18020 Standard Specification for Nuclear-Grade Hafnium Oxide Powder
C1098-93
WK18021 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
Proposed Revision of
A985/A985M-04a
WK18023 Standard Specification for Polyethylene Film and Sheeting
Proposed Revision of
D2103-05
WK18024 Standard Specification for Oriented Polypropylene Film
Proposed Revision of
D2673-04
WK18025 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
Proposed Revision of
D2838-07
WK18026 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
Proposed Revision of
D3981-03
WK18028 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
Proposed Revision of
D4635-01
WK18029 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater
Proposed Revision of
D4801-07
WK18030 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors
Proposed Revision of
D7192-05
WK18032 Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
Proposed Revision of
D7113-05
WK18040 Standard Test Methods for Testing Industrial Resistance Thermometers
Proposed Revision of
E644-06
WK18041 Standard Specification for Ductile Iron Gravity Sewer Pipe
Proposed Revision of
A746-03
WK18046 Hot Blowout and Thermal Cycling Performance for Polytetrafluoroethylene (PTFE) Sheet or Sheet-Like Gaskets
WK18050 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
Proposed Revision of
E648-06a
WK18051 Standard Practice for Ultimate Analysis of Coal and Coke
Proposed Revision of
D3176-89(2002)
WK18068 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
Proposed Revision of
B283-06
WK18071 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
Proposed Revision of
B411/B411M-06
WK18083 Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
Proposed Revision of
A266/A266M-03a
WK18088 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
Proposed Revision of
F2129-06
WK18089 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
Proposed Revision of
E1573-02
WK18090 Standard Specification for Diesel Fuel Oils
Proposed Revision of
D975-07b
WK18095 Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
Proposed Revision of
E1143-05
WK18096 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
Proposed Revision of
D4239-05
WK18098 Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
Proposed Revision of
D5016-07a
WK18100 Standard Test Method for Rating Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight
Proposed Revision of
E2527-06
WK18108 Standard Terminology Relating to Forensic Science
Proposed Revision of
E1732-96a(2005)
WK18109 Standard Terminology Relating to Forensic Science
Proposed Revision of
E1732-96a(2005)
WK18110 Standard Terminology Relating to Forensic Science
Proposed Revision of
E1732-96a(2005)
WK18113 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
Proposed Revision of
G32-06
WK18132 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
Proposed Revision of
B8-04
WK18134 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
Proposed Revision of
D5444-05
WK18148 Standard Specification for Portland Cement
Proposed Revision of
C150-07
WK18151 Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
WK18156 Standard Test Method for Distillation of Cut-Back Asphaltic (Bituminous) Products
Proposed Revision of
D402-02
WK18159 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
Proposed Revision of
D5167-03
WK18160 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
Proposed Revision of
C1231/C1231M-07
WK18162 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
Proposed Revision of
D2887-06a
WK18163 Standard Test Method for Radiologic Examination of Semiconductors and Electronic Components
Proposed Revision of
E1161-03
WK18167 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
Proposed Revision of
B122/B122M-06
WK18180 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
Proposed Revision of
C1679-07
WK18182 Hydraulically Applied Straw
WK18186 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
Proposed Revision of
D3306-05
WK18192 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
D4501-01e1
Replacement with Other
WK18193 Standard Specification for Grout for Masonry
Proposed Revision of
C476-07
WK18195 Standard Specification for Warnings on Refillable CO2 Cylinders Used In the Sport of Paintball
Proposed Revision of
F2553-06
WK18198 Standard Consumer Safety Performance Specification for Infant Bedding and Related Accessories
Proposed Revision of
F1917-00
WK18200 Standard Consumer Safety Performance Specification for Stationary Activity Centers
Proposed Revision of
F2012-07
WK18201 Standard Consumer Safety Performance Specification for Hand-Held Infant Carriers
Proposed Revision of
F2050-03
WK18203 Standard Consumer Safety Specification for Portable Bed Rails
Proposed Revision of
F2085-07
WK18208 Standard Terminology of Adhesives
Proposed Revision of
D907-06
WK18212 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
Proposed Revision of
E1323-89(2002)
WK18214 Standard Practice for Characterizing Neutron Energy Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation-Hardness Testing of Electronics
Proposed Revision of
E722-04e2
WK18216 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
Proposed Revision of
E34-94(2002)
WK18217 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
Proposed Revision of
E1601-98(2003)e1
WK18220 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
Proposed Revision of
C216-07a
WK18237 Hydraulically Applied Bonded Fiber Matrix
WK18238 Hydraulically Applied Fiber Reinforced Matrix
WK18240 Standard Test Method for Determining the Focal Size of Iridium-192 Industrial Radiographic Sources
Proposed Revision of
E1114-03
WK18241 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
Proposed Revision of
C989-06
WK18242 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
Proposed Revision of
C989-06
WK18243 Standard Practice for The Sensory Evaluation of Axillary Deodorancy
Proposed Revision of
E1207-02
WK18250 Standard Terminology Relating to Pesticides
Proposed Revision of
E609-05
WK18251 Standard Terminology Relating to Agricultural Tank Mix Adjuvants
Proposed Revision of
E1519-06ae1
WK18271 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
Proposed Revision of
C1552-03a
WK18273 Determination of Boron-10 Areal Density in Borated Aluminum Neutron Absorbers using Neutron Attenuation Measurements
WK18276 Standard Specification for Wrought Stainless Steels for Surgical Instruments
Proposed Revision of
F899-07
WK18280 Standard Practices for Thermal Neutron Radiography of Materials
Proposed Revision of
E748-02
WK18285 Standard Guide for Use in Selection of Liquid-Applied Sealants
Proposed Revision of
C1299-03
WK18288 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
Proposed Revision of
A757/A757M-00(2004)
WK18293 Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
Proposed Revision of
E598-96(2002)
WK18297 Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
Proposed Revision of
D6491-99(2003)
WK18299 Standard Terminology Relating to Concrete and Concrete Aggregates
Proposed Revision of
C125-07
WK18313 Determination of Benzene and Total Aromatics in Denatured Ethanol by Gas Chromatography
WK18316 Standard Terminology Relating to Molecular Spectroscopy
Proposed Revision of
E131-05
WK18319 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
Proposed Revision of
D1014-02
WK18327 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Continuous Wetting
Proposed Revision of
E2176-01
WK18329 Standard Specification for Seamless Copper Tube
Proposed Revision of
B75-02
WK18331 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
Proposed Revision of
A671-06
WK18332 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
Proposed Revision of
A672-06
WK18333 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
Proposed Revision of
A691-98(2007)
WK18344 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
Proposed Revision of
E882-87(2003)
WK18345 Standard Practice for Reporting Results from Methods of Chemical Analysis
Proposed Revision of
E1950-98(2003)
WK18351 Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)
Proposed Revision of
D2108-05
WK18355 Rapid Evaluation of Stability of Self-Consolidating Concrete
WK18357 Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
Proposed Revision of
E2273-03
WK18366 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer
Proposed Revision of
E1709-00e1
WK18370 Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry
Proposed Revision of
D6239-03
WK18377 Polyolefin Chopped Strands for Use in Concrete
WK18380 Standard Terminology for Anchors and Fasteners in Concrete and Masonry
Proposed Revision of
E2265-07
WK18384 Standard Guide for Studying Fire Incidents in Oxygen Systems
Proposed Revision of
G145-96(2001)
WK18387 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings
Proposed Revision of
E2126-07
WK18388 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
Proposed Revision of
A240/A240M-07e1
WK18392 D18.25 Working Dictionary
WK18396 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
Proposed Revision of
D6556-07
WK18397 Standard Terminology of Building Seals and Sealants
Proposed Revision of
C717-07a
WK18399 Standard Guide for Structural Sealant Glazing
Proposed Revision of
C1401-07
WK18405 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
Proposed Revision of
F2306/F2306M-07
WK18414 Dosimetry of Proton Beams for use in Radiation Effects Testing of Electronics
WK18419 High Efficiency Urinal Traps
WK18425 Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
WK18426 Water Conservation In Buildings Through In Situ Water Reclamation
WK18430 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
Proposed Revision of
C941-02
WK18432 Standard Guide for Sampling Fluvial Sediment in Motion
Proposed Revision of
D4411-03
WK18434 Standard Terminology Relating to Gaseous Fuels
Proposed Revision of
D4150-03
WK18435 Environmentally Preferable Products
WK18437 Standard Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue Engineered Medical Products
Proposed Revision of
F2450-04
WK18443 Standard Specification for Virgin Poly(L-Lactic Acid) Resin for Surgical Implants
Proposed Revision of
F1925-99(2005)
WK18446 Standard Practice for Computing the Colors of Objects by Using the CIE System
Proposed Revision of
E308-06
WK18448 Determination of Additive Elements in Lubricating Oils by EDXRF
WK18449 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material (Withdrawn 2009)
Proposed Revision of
E643-84(2000)
WK18452 Cloud Point of Petroleum Products (Small Test Jar Optical Method)
WK18469 Corrugated High Density Polyethylene (HDPE) Water Quality Units
WK18481 Delphastus catalinae (Horn) (Coleoptera:Coccinellidae).
WK18482 Capacity of Mixed Bed Ion Exchange Cartridges
WK18485 Standard Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards
Proposed Revision of
F1506-02ae1
WK18504 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
Proposed Revision of
B700-97(2002)
WK18508 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
Proposed Revision of
D3291-97(2003)
WK18512 Test Methods For Intervertebral Body Fusion Devices
Proposed Revision of
F2077-03
WK18521 Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength of Cohesive Soil
WK18522 Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
Proposed Revision of
D3761-96(2002)
WK18531 Evaluation of biodegradable heat transfer fluids
WK18535 Standard Practice for Automatic Sampling of Gaseous Fuels
Proposed Revision of
D5287-97(2002)
WK18536 Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
Proposed Revision of
D6492-99(2003)
WK18539 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
Proposed Revision of
D3311-06a
WK18549 Standard Specification for Concrete Aggregates
Proposed Revision of
C33-07
WK18551 Standard Specification for Biodegradable Plastics Used as Coatings on Paper and Other Compostable Substrates
Proposed Revision of
D6868-03
WK18552 Standard Practice for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
Proposed Revision of
E1004-02
WK18553 Resistance to Growth of Fungi on the Surface of Wet Blue in an Environmental Chamber
WK18554 Standard Guide for Conducting Terrestrial Plant Toxicity Tests
Proposed Revision of
E1963-02
WK18561 Standard Guide for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas
Proposed Revision of
F2049-03
WK18568 Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
Proposed Revision of
E471-96(2002)
WK18571 Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
Proposed Revision of
E377-96(2002)
WK18575 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
Proposed Revision of
A732/A732M-05
WK18576 Sampling of gaseous UF6
WK18580 Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
Proposed Revision of
D4327-03
WK18581 Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography
Proposed Revision of
D5257-03
WK18582 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
Proposed Revision of
D6919-03
WK18583 Standard Test Method for Boron In Water
Proposed Revision of
D3082-03
WK18594 Standard Test Method for Maleic Acid in Maleic Anhydride by Potentiometric Titration
Proposed Withdrawal of
D2930-03
WK18595 Standard Test Method for Color of Maleic Anhydride and Phthalic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale)
Proposed Withdrawal of
D3366-95(2003)e1
WK18597 Standard Specification for Maleic Anhydride
Proposed Withdrawal of
D3504-96(2003)e1
WK18598 Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
WK18599 Standard Test Method for Measuring Neutron Fluence and Average Energy from 3H(d,n)4He Neutron Generators by Radioactivation Techniques 1
Proposed Revision of
E496-02
WK18604 Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
Proposed Revision of
F1111-02
WK18612 Standard Test Methods for Evaluating Masonry Bond Strength
Proposed Revision of
C1357-05
WK18635
Proposed Revision of
D4829-07
WK18636 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
Proposed Revision of
E2072-04
WK18638 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
Proposed Revision of
E2072-04
WK18643 Endotoxin Concentration in Water-Miscible Metalworking Fluids
WK18653 Standard Terminology Relating to Materials for Roads and Pavements
Proposed Revision of
D8-02
WK18656 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
Proposed Revision of
F1487-07ae1
WK18674 Air Permeance of Building Materials on Substrates1
WK18675 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
Proposed Revision of
D2420-07
WK18680 determination of cooling characteristics for alluminum alloys by cooling curve analysis
WK18687 Evaluating Air Performance Characteristics of Battery Powered Vacuum Cleaners
WK18689 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
Proposed Revision of
D2420-07
WK18691 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
Proposed Revision of
B244-97(2002)
WK18692 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
Proposed Revision of
B530-02
WK18693 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
Proposed Revision of
B499-96(2002)
WK18694 Standard Specification for Resilient Wall Base
Proposed Revision of
F1861-02
WK18695 Standard Specification for Resilient Stair Treads
Proposed Revision of
F2169-02
WK18704 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms
Proposed Revision of
F2090-01a(2007)
WK18711 Standard Specification for Coded Values Used in the Electronic Health Record
Proposed Revision of
E1633-07
WK18714 Standard Test Method for Determining the Actuation Force and Contact Force of a Membrane Switch (Withdrawn 2008)
F1597-02
Replacement with F2592-07a
WK18715 Standard Test Method for Determining Travel of a Membrane Switch (Withdrawn 2008)
F1682-02
Replacement with F2592-07a
WK18716 Standard Test Method for Determining the Sensitivity (Teasing) of a Tactile Membrane Switch (Withdrawn 2008)
F1997-07
Replacement with F2592-07a
WK18718 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
Proposed Revision of
D228-06
WK18719 Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs
Proposed Revision of
D7053-07
WK18722 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
Proposed Revision of
F1661-96(2002)
WK18723 Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component
Proposed Revision of
F1683-05e1
WK18757 Evaluating the Surface Burning Characteristics of Fire-Retardant-Treated Wood
WK18767 Standard Safety Specification for Consumer Trampoline Enclosures
Proposed Revision of
F2225-06
WK18772 Standard Terminology for F16 Mechanical Fasteners
Proposed Revision of
F1789-07c
WK18774 Standard Terminology for F16 Mechanical Fasteners
Proposed Revision of
F1789-07c
WK18775 Standard Specification for Blended Hydraulic Cements
Proposed Revision of
C595-08
WK18797 Standard Practices for Detecting Leaks in Reverse Osmosis Devices
Proposed Revision of
D3923-94(2003)e1
WK18805 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
Proposed Revision of
D7397-07
WK18806 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-08
WK18808 Cost Item General Categories Universally Applicable in Most Code-of-Accounts Structures and Across Most Typical Cost Estimates
WK18809 Standard Specification for Blended Hydraulic Cements
Proposed Revision of
C595-08
WK18814 Relative Intensity Correction of Raman Spectrometers
WK18827 Standard Guide for PDD Examination Standards of Practice
Proposed Revision of
E2062-07
WK18834 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
Proposed Revision of
D2950-05
WK18835 Active Soil Gas Sampling in the Vadose Zone for VaporIntrusion Evaluations
WK18861 Plain and Deformed Wire, and Welded Plain and Deformed Wire Reinforcement
WK18863 Standard Test Method for Seal Strength of Flexible Barrier Materials
Proposed Revision of
F88-07a
WK18864 Standard Practice for Use of a Polymethylmethacrylate Dosimetry System
Proposed Revision of
ISO/ASTM51276-02
WK18866 Standard Guide for Packaging Materials for Foods to Be Irradiated
Proposed Revision of
F1640-03
WK18867 Standard Guide for Irradiation of Finfish and Aquatic Invertebrates Used as Food to Control Pathogens and Spoilage Microorganisms
Proposed Revision of
F1736-03
WK18869 Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma-Ray Irradiator
Proposed Revision of
ISO/ASTM52116-02
WK18883 Performing Constructability Evaluations
WK18885 Harmonized Amusement Ride and Device Standard for Canada
WK18887 Sampling of Expanded Polystyrene Geofoam Specimens
WK18892 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-08
WK18896 Standard Specification for Steel Wire, Chromium-Silicon Alloy
Proposed Revision of
A401/A401M-03
WK18900 Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test
Proposed Revision of
E2492-07
WK18905 Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature
Proposed Revision of
E563-02e1
WK18908 Standard Test Method for Performance of Large Open Vat Fryers
Proposed Revision of
F2144-07
WK18909 Standard Test Methods for Performance of Range Tops
Proposed Revision of
F1521-03
WK18910 Standard Test Method for Performance of Combination Ovens
Proposed Revision of
F1639-05
WK18911 Standard Test Method for Performance of Commercial Patio Heaters
Proposed Revision of
F2644-07
WK18912 Standard Test Method for Performance of Rapid Cook Ovens
Proposed Revision of
F2238-03
WK18913 Standard Test Methods for Performance of Steam Cookers
Proposed Revision of
F1484-05
WK18916 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
Proposed Revision of
C490-07
WK18917 Fire-resistive Wall Continuity Systems
WK18918 Standard Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
Proposed Revision of
F2562/F2562M-07
WK18919 Cummins ISM Test
WK18920 Standard Test Methods for Determining Structural Capacities of Insulated Panels
Proposed Revision of
E1803-06
WK18923 Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography
Proposed Revision of
D5186-03
WK18934 Standard Safety Specification for Steel Frame and Enclosure Components of Consumer Trampolines
WK18935 Standard Terminology of Building Economics
Proposed Revision of
E833-06
WK18942 Standard Practice for Installation of Underground Precast Concrete Utility Structures
Proposed Revision of
C891-90(2003)
WK18943 Standard Specification for Underground Precast Concrete Utility Structures
Proposed Revision of
C858-07
WK18945 Standard Specification for Underground Precast Concrete Utility Structures
Proposed Revision of
C858-07
WK18947 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
Proposed Revision of
D7219-05
WK18954 Standard Specification for Copper Alloy Sand Castings for General Applications
Proposed Revision of
B584-06a
WK18955 Standard Specification for Copper Alloys in Ingot Form
Proposed Revision of
B30-06a
WK18956 Standard Specification for Copper Alloy Continuous Castings
Proposed Revision of
B505/B505M-07
WK18957 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
Proposed Revision of
B806-06
WK18958 Standard Specification for Aboveground Portable Pools for Residential Use
Proposed Revision of
F2666-07
WK18962 Standard Specification for Ladders, Fixed, Vertical, Steel, Ship's (Withdrawn 2008)
F840-83(2003)
Replacement with F1166
WK18963 Mechanical Seal Strength Testing for Cups, Bowls, and Trays with Flexible Peelable Lids
WK18964 Standard Test Method for Measuring Core Thickness of Textured Geomembrane
Proposed Revision of
D5994-98(2003)
WK18965 the Case Review of Forensic Document Examinations
WK18978 relating to precast concrete products
WK18983 Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
Proposed Revision of
F1043-06
WK18986 International Specification for Undenatured Fuel Grade Ethanol
WK18987 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
Proposed Revision of
C1567-07
WK18989 Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
Proposed Revision of
C1288-99(2004)
WK18992 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
Proposed Revision of
D2937-04
WK18994 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
Proposed Revision of
E662-06
WK18996 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
Proposed Revision of
C1063-07
WK19008 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
Proposed Revision of
B221-06
WK19009 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
Proposed Revision of
B221M-07
WK19017 Acidity in Mono-, Di-, Tri-, and Tetraethylene Glycol by Potentiometric Titration
WK19018 Sampling and Testing Structural Cementitious Sheathing Panels
WK19019 Structural cementitious sheathing panels
WK19020 Standard Test Method for Carbon Black—Void Volume (VV)
Proposed Revision of
D6086-05
WK19021 Standard Test Method for Carbon Black—Oil Absorption Number (OAN)
Proposed Revision of
D2414-08
WK19022 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
Proposed Revision of
D6815-02a
WK19032 Oxidation Stability of Middle Distillate Fuels - Rapid Small Scale Oxidation Test (RSSOT)
WK19042 UPS SYSTEMS SHIPBOARD
WK19049 Consistence and Reproducibility of Sputter Rate Measurements
WK19060 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-07
WK19061 the Determination of Nitrate + Nitrite Nitrogen in Aqueous Samples using Nitrate Reductase
WK19062 Polyethylene of Raised Temperature (PE-RT) Plastic Hot- and Cold-Water Tubing and Distribution Systems
WK19063 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-07
WK19066 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing
Proposed Revision of
E329-07a
WK19068 Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
Proposed Revision of
D2229-04e1
WK19069 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-07
WK19070 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-07
WK19071 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-07
WK19072 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
Proposed Revision of
A706/A706M-06a
WK19074 Standard Terminology for Waste and Waste Management
Proposed Revision of
D5681-98a(2004)e1
WK19081 Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
WK19089 Determination of Total Mercury in Crude Oil by Combustion Cold Vapor Atomic Absorption Spectroscopy
WK19091 Precast Concrete Products for Stormwater Management
WK19092 Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes
Proposed Revision of
D1411-04
WK19093 Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design Strength Parameters
Proposed Revision of
D4320-04
WK19099 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
Proposed Revision of
D5102-04
WK19105 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
Proposed Revision of
D5453-08
WK19113 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
Proposed Revision of
D6752-03e1
WK19114 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
Proposed Revision of
D6857-03
WK19115 Standard Practice for Use of Inorganic Process Wastes as Structural Fill
Proposed Revision of
E850-95(2007)
WK19129 Standard Test Methods for Male Condoms Made from Synthetic Materials
Proposed Revision of
D6324-05
WK19130 Lead Content in Polyvinyl Chloride (PVC) Plastics Used in Childrens Consumer Products
WK19134 Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
Proposed Revision of
D7365-07
WK19149 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
Proposed Revision of
F1487-07ae1
WK19151 Standard Test Method for Thermal Stability by Thermogravimetry
Proposed Revision of
E2550-07
WK19153 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
Proposed Revision of
E1354-08
WK19170 Standard Specification for Management of the Confidentiality and Security of Dictation, Transcription, and Transcribed Health Records
Proposed Revision of
E1902-02
WK19176 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
Proposed Revision of
F1951-99
WK19183 Standard Test Methods for Screening of pH in Waste
Proposed Withdrawal of
D4980-89(2003)
WK19195 Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments
WK19196 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
Proposed Revision of
B490-92(2003)
WK19199 Standard Specification for Elastomeric Joint Sealants
Proposed Revision of
C920-05
WK19202 Standard Practice for Evaluating High-Density Rigid Cellular Plastics
Proposed Revision of
D3748-03
WK19206 Standard Terminology Relating to Resilient Floor Coverings
Proposed Revision of
F141-04
WK19219 Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
Proposed Revision of
D5680-95a(2001)
WK19227 Standard Test Methods for Tensile Testing of Aramid Yarns
Proposed Revision of
D7269-07
WK19236 Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy
Proposed Revision of
D7200-06
WK19241 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-08
WK19246 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation
Proposed Revision of
D3274-95(2002)
WK19248 Standard Specification for Tool Steels Alloy
Proposed Revision of
A681-07
WK19249 Measuring the Chemical Composition of Silica Fume
WK19253 Certification of Personnel Engaged in Construction Inspection and/or Testing
WK19261 Qualifications of Construction Materials Testing & Inspection Personnel
WK19262 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
Proposed Revision of
C1077-07a
WK19263 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
Proposed Revision of
F1717-04
WK19266 Standard Guide for Evaluating Nonwoven Fabrics
Proposed Withdrawal of
D1117-01
WK19271 Standard Test Method for Tearing Strength of Nonwoven Fabrics by the Trapezoid Procedure
Proposed Withdrawal of
D5733-99
WK19273 Standard Test Method for Tearing Strength on Nonwoven Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
Proposed Withdrawal of
D5735-95(2001)
WK19285 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
Proposed Revision of
B881-05
WK19286 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
Proposed Revision of
D6918-03(2007)
WK19300 Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
Proposed Revision of
C1581-04
WK19302 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
Proposed Revision of
C836-06
WK19303 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
Proposed Revision of
C957-06
WK19304 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
Proposed Revision of
C739-05be1
WK19307 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
Proposed Revision of
D6300-07
WK19308 Risk Assessments of Property Management Systems
WK19311 Standard Terminology for Unmanned Air Vehicle Systems
Proposed Revision of
F2395-07
WK19312 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
Proposed Revision of
E2584-07
WK19313 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing
Proposed Revision of
E329-07a
WK19315 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
Proposed Revision of
D2887-06a
WK19316 Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
Proposed Revision of
E1414-06
WK19317 Standard Test Methods for Loop Tack
Proposed Revision of
D6195-03e1
WK19318 Standard Test Method for Abrasion of Ambidextrous Medical Examination Gloves
WK19345 Biobased Polyester Floor Tile
WK19346 Standard Specification for Styrene Monomer
Proposed Revision of
D2827-04
WK19348 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
Proposed Revision of
D2699-07a
WK19349 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
Proposed Revision of
D2700-07b
WK19350 Standard Specification for Glass Fiber Cord and Sewing Thread
Proposed Revision of
D4030-04
WK19351 Toxic Industrial Chemical/Toxic Industrial Material (TIC/TIM) Vapor Detector
WK19352 Materials to Mitigate the Spread of Radioactive Contamination after a Radiological Dispersion Event
WK19354 Standard Specification for Silicon Nitride Bearing Balls
Proposed Revision of
F2094-06e1
WK19355 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
Proposed Revision of
C1149-06e1
WK19356 Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
Proposed Revision of
G141-03
WK19361 Standard Test Method for Insulating Glass Unit Performance
Proposed Revision of
E2188-02
WK19362 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units
Proposed Revision of
E2189-02
WK19363 Standard Guide for Minimum Training Requirements for Forensic Document Examiners
Proposed Revision of
E2388-05
WK19364 Standard Specification for Insulating Glass Unit Performance and Evaluation
Proposed Revision of
E2190-02
WK19366 Standard Guide for Scope of Work of Forensic Document Examiners
Proposed Revision of
E444-07
WK19367 Standard Guide for Indentation Examinations
Proposed Revision of
E2291-03
WK19368 Standard Terminology for Cotton Fibers
Proposed Revision of
D7139-05
WK19372 Analysis of impurities in refined Silver by ICP
WK19373 Analysis of platinum and palladium at 4% in PGM alloys by ICP
WK19375 Silver by Double Cupellation fire assay in metal bearing ores, concentrates and related materials
WK19382 Standard Guide for Minimum Training Requirements for Forensic Document Examiners
Proposed Revision of
E2388-05
WK19392 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
Proposed Revision of
B751-03
WK19393 Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure
Proposed Revision of
E2150-04
WK19394 Determining the Effective Arc Rating of FR materials in an Arc Flash Exposure with a High Proportion of Convective Energy
WK19395 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615°C by Gas Chromatography
Proposed Revision of
D7213-05
WK19396 Standard Test Method for Durability Testing of Duct Sealants
Proposed Revision of
E2342-03
WK19397 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
Proposed Revision of
D870-02
WK19398 Examination of Counterfeit Documents.
WK19415 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-07e1
WK19416 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-07e1
WK19418 Standard Test Method for Constant-Temperature Stability Of Chemical Materials
Proposed Revision of
E487-04
WK19420 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
Proposed Revision of
D7175-07
WK19423 Grading of Built-Up Roofing Asphalt BURA) by Dynamic Shear Rheometer
WK19425 Standard Practice for Comparative Evaluation of the Imaging Properties of Dry Electrostatic Toners
Proposed Revision of
F596-82(2003)
WK19428 Standard Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal Computer Printers
Proposed Revision of
F1423-97(2008)
WK19429 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
Proposed Revision of
G151-06
WK19430 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
Proposed Revision of
D2699-07a
WK19431 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
Proposed Revision of
D2700-07b
WK19433 GENERAL USE LIQUID-IN-GLASS LABORATORY THERMOMETERS
WK19434 GENERAL USE LABORATORY HYDROMETERS
WK19460 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
Proposed Revision of
B479-06
WK19464 Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device
WK19465 Using a Test Chamber for Humidity Conditioning of Test Panels
WK19469 Standard Specification for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
Proposed Revision of
D5927-03
WK19471 Thermoplastic Pavement Marking Material for Use in Non-Snow Plow Areas
WK19473 Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
Proposed Revision of
E62-89(2004)
WK19474 Standard Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys
Proposed Revision of
E75-76(2004)
WK19475 Standard Test Methods for Chemical Analysis of Copper-Beryllium Alloys
Proposed Revision of
E106-83(2004)
WK19476 Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys
Proposed Revision of
E118-89(2004)
WK19477 Standard Test Methods for Chemical Analysis of Copper-Tellurium Alloys
Proposed Revision of
E121-83(2004)
WK19478 Standard Test Methods for Chemical Analysis of Beryllium
Proposed Revision of
E439-04a
WK19479 Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys
Proposed Revision of
E581-04e1
WK19500 Analysis of Copper Beryllium Alloys by Plasma Spectroscopy
WK19501 Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
WK19507 30 to 60-inch Triple Wall HDPE Pipe and Fittings for Gravity Flow Sanitary Sewer Applications
WK19508 30 to 60-inch Polypropylene (PP) Triple Wall Pipe and Fittings for Gravity Flow Sanitary Sewer Applications
WK19509 Installation of Water-Resistive Barriers
WK19510 Water Resistance of Water-Resistive Barriers
WK19511 Standard Test Method for Air Permeance of Building Materials
Proposed Revision of
E2178-03
WK19513 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
Proposed Revision of
E2357-05
WK19514 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
Proposed Revision of
E2357-05
WK19521 Assessment of the Impact of Sensitive Data Storage Device Loss
WK19525 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
Proposed Revision of
D2665-07
WK19527 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
Proposed Revision of
D3776-07
WK19529 Non Destructive Pressure or Vacuum Decay Leak Test for Sealed Products or Packages
WK19533 Determining the Area Stability of Wet Blue Submersed in Boiling Water
WK19536 Standard Practice for Radioscopy
Proposed Revision of
E1255-96(2002)
WK19541 Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
Proposed Revision of
E1745-97(2004)
WK19543 Flame Resistance of Leather
WK19546 Standard Practice for Application of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Requiring Seismic Restraint
Proposed Revision of
E580/E580M-06
WK19547 Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
Proposed Revision of
D229-01
WK19548 Standard Test Method for Carbon Black-Morphological Characterization of Carbon Black Using Electron Microscopy
Proposed Revision of
D3849-07
WK19549 Chlorinated Poly(Vinyl Chloride)/Aluminum/ Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
WK19551 Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)
WK19552 Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
WK19553 Waterfront--UNIFORMAT II
WK19554 Trace impurities in monocyclic aromatic hydrocarbons by Gas Chromatography and Effective Carbon Number
WK19555 Standard Specification for Polyamide 11 (PA 11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 Pipe and Tubing
Proposed Revision of
F2145-01(2007)
WK19556 Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
Proposed Revision of
D4811-06
WK19561 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
Proposed Revision of
A924/A924M-07
WK19566 Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
Proposed Revision of
C1340-04
WK19568 Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
Proposed Revision of
A568/A568M-07a
WK19569 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
Proposed Revision of
E1529-06
WK19571 Requirements for New Pipe and Fitting Materials for Gas Distribution Systems
WK19572 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
Proposed Revision of
D2513-07b
WK19575 Standard Test Methods for Constituent Content of Composite Materials
Proposed Revision of
D3171-06
WK19576 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
Proposed Revision of
A635/A635M-07
WK19577 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
Proposed Revision of
D2638-06
WK19578 Standard Test Method for Determination of Crystallite Size (Lc of Calcined Petroleum Coke by X-Ray Diffraction
Proposed Revision of
D5187-91(2007)
WK19580 Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic MAterials under ACcelerated Bioreactor Landfill Conditions
WK19581 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
Proposed Revision of
F1498-00e1
WK19583 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
Proposed Revision of
F1412-01e1
WK19584 Standard Practice for Sampling Freshly Mixed Concrete
Proposed Revision of
C172-07a
WK19585 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
Proposed Revision of
C1289-07
WK19586 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
Proposed Revision of
C1289-07
WK19587 Standard Practice for Electrothermal (Graphite Furnace) Atomic Absorption Analysis
Proposed Revision of
E1184-02
WK19589 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
Proposed Revision of
D3981-03
WK19593 Standard Test Method for Surface Burning Characteristics of Building Materials
Proposed Revision of
E84-08a
WK19596 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
Proposed Revision of
E2168-06
WK19618 INDUSTRIAL THERMAL INSULATION SYSTEMS
WK19622 Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
Proposed Revision of
A649/A649M-04
WK19624 Application of Heat Weldable Styrene Butadiene Styrene (SBS) Modified Bituminous Waterproofing Membranes Systems for New Building Decks
WK19627 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
Proposed Revision of
B768-99(2004)
WK19628 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
Proposed Revision of
B441-04
WK19633 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
Proposed Revision of
D2513-07b
WK19640 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil Impregnated)
Proposed Revision of
B439-07
WK19647 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
Proposed Revision of
D3512-07
WK19659 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
Proposed Revision of
B465-04
WK19660 Developing and Using Appropriate Scales
WK19671 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
Proposed Revision of
D6258-04
WK19672 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
Proposed Revision of
D6756-02
WK19674 Standard Practice for Sampling of Geosynthetics for Testing
Proposed Revision of
D4354-99(2004)
WK19692 Electrochemical Noise Measurement
WK19694 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
Proposed Revision of
B569-04
WK19695 Standard Specification for Copper and Copper Alloy Clad Steel Plate
Proposed Revision of
B432-04
WK19696 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
Proposed Revision of
B598-98(2004)
WK19703 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
Proposed Revision of
B820-04e1
WK19704 Standard Specification for Copper-Clad Steel Wire for Electronic Application
Proposed Revision of
B452-02
WK19706 Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface
WK19709 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
Proposed Revision of
D2665-07
WK19715 Standard Test Methods for Archery Bowstring Component-Serving String Material
Proposed Revision of
F1648-95(2003)
WK19716 Standard Specification for Determining the Rating Velocities of an Archery Bow
Proposed Revision of
F1544-04
WK19717 Standard Test Method for the Determination of Percent of Let-Off for Archery Bows
Proposed Revision of
F1880-98(2004)
WK19721 Testing Forced Entry Resistance of Security Fence Systems
WK19722 Standard Specification for Fire Safety for Candle Accessories
Proposed Revision of
F2601-07
WK19728 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing
Proposed Revision of
E329-07a
WK19731 Standard Guide for General Design Considerations for Hot Cell Equipment
Proposed Revision of
C1533-02
WK19739 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
Proposed Revision of
D4798-08
WK19740 Standard Guide for Labeling of UV-Protective Textiles
Proposed Revision of
D6603-07
WK19743 Heats and Temperatures of Transition by High Rate Differential Scanning Calorimetry
WK19744 Standard Test Method for Access Depth Under Furniture of Vacuum Cleaners
Proposed Revision of
F420-04
WK19745 Standard Specification for Welded Stainless Steel Mechanical Tubing
Proposed Revision of
A554-08
WK19746 Abrasion loss of highly abrasion resistant materials
WK19750 Standard Specification for Brass Rod, Bar, and Shapes
Proposed Revision of
B927-03
WK19752 Standard Test Method for Hardness Testing of Cemented Carbides
Proposed Revision of
B294-92(2006)
WK19753 Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices
Proposed Revision of
F1251-89(2003)
WK19754 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
Proposed Revision of
A640-97(2002)e1
WK19755 Standard Specification for Zinc-Coated Steel Wire Strand
Proposed Revision of
A475-03
WK19756 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
Proposed Revision of
A363-03
WK19757 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
Proposed Revision of
A925-03
WK19758 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
Proposed Revision of
A856/A856M-03
WK19759 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
Proposed Revision of
A855/A855M-03
WK19760 Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
Proposed Revision of
A741-98(2003)
WK19763 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
Proposed Revision of
A213/A213M-08
WK19764 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
Proposed Revision of
A213/A213M-08
WK19767 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
Proposed Revision of
A268/A268M-05a
WK19768 Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes
Proposed Revision of
A803/A803M-08
WK19774 Standard Guide for Design Criteria for Plutonium Gloveboxes (Withdrawn 2006)
C852-93(1997)
WK19776 Cloud Point of Petroleum Products (Automated Method)
WK19777 Standard Specification for Greige Woven Glass Fabrics
Proposed Revision of
D579-04
WK19778 Standard Specification for Finished Woven Glass Fabrics
Proposed Revision of
D4029-04
WK19779 Autogenous Strain of Cement Paste and Mortar
WK19786 Robot Navigation During Teleoperation
WK19790 Standard Specification for Blended Hydraulic Cements
Proposed Revision of
C595-08
WK19796 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique
Proposed Revision of
D3749-95(2002)
WK19797 Determing Gel Content in Cross-Linked Ethylene Plastics Using Pressurized Liquid Extraction
WK19799 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
Proposed Revision of
C1140-03a
WK19802 Standard Specification for Hardened Steel Washers [Metric]
Proposed Revision of
F436M-04
WK19803 Additional Requirements for Universal Design of Fitness Equipment Optimization for Inclusive Use for Persons with Functional LImitations and Impairments
WK19806 Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-Rain)
WK19809 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Proposed Revision of
C578-07
WK19817 Determining Limits of Detection in Trace Explosive Particle Detectors
WK19818 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
Proposed Revision of
A635/A635M-07
WK19819 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
Proposed Revision of
A1031-05
WK19820 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
Proposed Revision of
A505-00(2005)
WK19826 P-Trap, Supply Stops and Riser Insulation Protection
WK19830 Standard Guide for Estimating Oil Spill Recovery System Effectiveness
Proposed Revision of
F1780-97(2002)
WK19832 Standard Specification for Gypsum Board
Proposed Revision of
C1396/C1396M-06a
WK19833 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
Proposed Revision of
E2121-03
WK19840 Standard Test Method for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
Proposed Revision of
E538-98(2003)e1
WK19841 Standard Practice for Specimen Preparation and Mounting of Plastic Pipe and Tubing for Building Applications to Assess Surface Burning Characteristics
WK19842 Standard Terminology for F16 Mechanical Fasteners
Proposed Revision of
F1789-07c
WK19843 Standard Test Method for Carbon Black—Oil Absorption Number (OAN)
Proposed Revision of
D2414-08
WK19856 Standard Specification for Raw and Burnt Sienna Pigments
Proposed Revision of
D765-87(2003)
WK19858 Standard Practice for Using a 67.23-in. (1.707-m) Diameter Laboratory Test Roadwheel in Testing Tires (Withdrawn 2009)
Proposed Revision of
F551-89(2000)
WK19859 Standard Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys (Withdrawn 2008)
E35-88(2002)
Replacement with B0954
WK19861 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections [Metric]
Proposed Revision of
C877M-02e1
WK19863 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (P/M) Parts
Proposed Revision of
B931-03
WK19864 Test Method for Density Determination for Powder Metallurgy (P/M) Materials Containing Less Than Two Percent Porosity
Proposed Revision of
B311-93(2002)e1
WK19866 Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
Proposed Revision of
E415-99a(2005)
WK19867 Standard Terminology Relating to Safety and Traction for Footwear
Proposed Revision of
F1646-05e1
WK19870 Recovering Residue using an Evaporative Technique for Emulsified Asphalts
WK19872 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
Proposed Revision of
D70-08
WK19874 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
Proposed Revision of
F2634-07
WK19875 Construction Job Productivity Measurement
WK19876 Bicycle Handlebar Grips
WK19877 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
Proposed Revision of
F1951-08
WK19878 Essential Safety Requirements for Equipment Comprising the Patient-Centric Integrated Clinical Environment (ICE) Part 1: General Requirements and Conceptual Model
WK19879 Standard Specification for Titanium and Titanium Alloy Castings
Proposed Revision of
B367-06
WK19881 Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing
Proposed Revision of
ISO/ASTM51261-02
WK19883 Conducting and Evaluating Galvanic Corrosion Tests of Medical Implant Devices
WK19887 Evaluation of the Effectiveness of Biological Decontamination Procedures for Air Permeable Materials when Challenged by a Viral Aerosol
WK19888 Evaluation of the Effectiveness of Biological Decontamination Procedures for Surfaces When Challenged with Viral Droplets
WK19889 Standard Guide for Preparing an Acoustic Emission Examination Plan for Plate-like and Flat Panel Aerospace Composite Structures.
WK19891 Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels, E 706 (IH)
Proposed Revision of
E636-02
WK19905 Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use
Proposed Revision of
F1426-94(2003)
WK19921 High-Strength Loy-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controll Process (TMCP)
WK19923 Copper-Zinc-Tin-Bismuth Alloy Rod and Bar for Plumbing and Drinking Water Applications
WK19925 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
Proposed Revision of
B687-99(2005)e1
WK19926 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
Proposed Revision of
E1557-05
WK19927 Specification for Nuclear-Grade Beryllium Oxide Powder (Withdrawn 1991)
C708-87
WK19930 Standard Test Methods for Fire Tests of Building Construction and Materials
Proposed Revision of
E119-08a
WK19931 Standard Test Method for Thermal Insulation Performance of Distribution Packages
Proposed Revision of
D3103-07
WK19932 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
Proposed Revision of
A684/A684M-06
WK19933 Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
Proposed Revision of
A568/A568M-07a
WK19937 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
Proposed Revision of
A193/A193M-08
WK19940 Analytical Test Methods for Substances of Very High Concern in Materials and Products
WK19941 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
Proposed Revision of
A194/A194M-08
WK19944 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
Proposed Revision of
A1008/A1008M-07a
WK19945 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
Proposed Revision of
A1011/A1011M-07
WK19955 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
Proposed Revision of
C1077-07a
WK19961 Standard Consumer Safety Specification for Toy Safety
Proposed Revision of
F963-07e1
WK19962 Standard Specification for In-Service Care of Insulating Line Hose and Covers
Proposed Revision of
F478-92(2007)
WK19963 Standard Specification for Structural Steel for Bridges
Proposed Revision of
A709/A709M-07
WK19965 Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms
Proposed Revision of
C1308-95(2001)
WK19968 Specification for Nuclear-Grade Beryllium Oxide Powder (Withdrawn 1991)
C708-87
WK19971 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
Proposed Revision of
D2513-07b
WK19975 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
Proposed Revision of
E185-02
WK19976 Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels
Proposed Revision of
E2215-02
WK19979 Standard Specification for Cast Iron Soil Pipe and Fittings
Proposed Revision of
A74-06
WK19981 Standard Specification for Polysulfone Resin for Medical Applications
Proposed Revision of
F702-98a(2003)
WK19982 ICP Analysis of Calcium and Magnesium in Magnesium Ferrosilicon
WK19983 Standard Terminology Relating to Sensory Evaluation of Materials and Products
Proposed Revision of
E253-07a
WK19987 Standard Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing
Proposed Revision of
D5036-99(2005)
WK19989 Standard Practice for Application of Mechanically Attached Poly(Vinyl Chloride) Sheet Roofing
Proposed Revision of
D5082-99(2005)
WK19997 Standard Guide for Determining Synergism Between Wear and Corrosion
Proposed Revision of
G119-04
WK20003 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
Proposed Revision of
F2338-07
WK20004 Standard Test Method for Hydration Resistance of Basic Bricks and Shapes
Proposed Revision of
C456-93(2008)
WK20005 Dispersion of Chromatic Pigments with a Mechanical Muller
WK20006 Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes
Proposed Revision of
D4437-08
WK20008 Block resistance of inks and coatings
WK20009 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
Proposed Revision of
A1008/A1008M-07a
WK20016 Standard Specification for Xylenes for p-Xylene Feedstock
Proposed Revision of
D5211-07
WK20018 Standard Specification for Refined Benzene-535
Proposed Revision of
D2359-07
WK20020 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
Proposed Revision of
A815/A815M-08
WK20022 Standard Specification for Refined Benzene-545
Proposed Revision of
D4734-07
WK20023 Standard Specification for Benzene for Cyclohexane Feedstock
Proposed Revision of
D5871-07
WK20024 Standard Specification for Benzene for Use with Zeolite Based Catalysts
Proposed Revision of
D7124-07
WK20025 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene
Proposed Revision of
D7185-07
WK20026 Standard Test Method for Analysis of Benzene by Gas Chromatography
Proposed Revision of
D4492-07
WK20036 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
Proposed Revision of
D3679-06a
WK20037 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
Proposed Revision of
D3679-06a
WK20053 Standard Consumer Safety Performance Specification for Home Playground Equipment
Proposed Revision of
F1148-05
WK20061 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
Proposed Revision of
E2121-03
WK20062 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
Proposed Revision of
G50-76(2003)
WK20063 Standard Practice for Characterization of Atmospheric Test Sites
Proposed Revision of
G92-86(2003)
WK20064 Standard Practice for Monitoring Atmospheric SO2 Using the Sulfation Plate Technique
Proposed Revision of
G91-97(2004)
WK20067 Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems
Proposed Revision of
E907-96(2004)
WK20069 Specification for Tin Coating (Hot-Dip) on Iron and Steel Hardware
WK20071 Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
Proposed Revision of
C1105-08
WK20072 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
Proposed Revision of
C1293-08a
WK20073 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
Proposed Revision of
C1293-08a
WK20074 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
Proposed Revision of
C1260-07
WK20075 Determination of Higher Molecular Weight Components in Fuel Corrosion Inhibitors by Gel Permeation Chromatography
WK20077 Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
WK20081 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
Proposed Revision of
E2072-04
WK20082 Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings
Proposed Revision of
E2030-07
WK20083 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
Proposed Revision of
E2073-07
WK20084 Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings
Proposed Revision of
E2030-07
WK20085 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
Proposed Revision of
E2073-07
WK20089 Standard Specification for Pigments for Integrally Colored Concrete
Proposed Revision of
C979-05
WK20097 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
Proposed Revision of
C411-05
WK20098 Rescue Litters
WK20099 Determining Friction Energy Dissipated in Reciprocating Tribosystems
WK20101 Standard Terminology Relating to Declarable Substances in Materials
Proposed Revision of
F2576-07a
WK20103 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
Proposed Revision of
D3241-08a
WK20119 Test Coupons for Steel Castings
WK20123 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials
Proposed Revision of
C24-01(2006)
WK20124 Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods
Proposed Revision of
E1318-02
WK20125 Standard Test Method for Respirable Dust in Workplace Atmospheres
Proposed Revision of
D4532-97(2003)
WK20129 Evaluating Limestone for Use in Wet Flue Gas Desulfuization Applications by Reactivity
WK20132 Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices
Proposed Revision of
E2532-06
WK20133 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Proposed Revision of
A370-08a
WK20134 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
Proposed Revision of
C167-98(2003)
WK20135 Standard Specification for Pearlitic Malleable Iron
Proposed Revision of
A220/A220M-99(2004)
WK20136 Standard Specification for Automotive Malleable Iron Castings
Proposed Revision of
A602-94(2004)
WK20137 Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
Proposed Revision of
A874/A874M-98(2004)
WK20138 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)
Proposed Revision of
D7157-05
WK20139 Standard Practice for Modified Salt Spray (Fog) Testing
Proposed Revision of
G85-02e1
WK20146 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
Proposed Revision of
D4477-04a
WK20147 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
Proposed Revision of
B456-03
WK20148 Standard Specification for Rivets, Steel, Structural
Proposed Revision of
A502-03
WK20149 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
Proposed Revision of
C1549-04
WK20165 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
Proposed Revision of
F406-08
WK20166 Standard Specification for Headed Steel Bars for Concrete Reinforcement
Proposed Revision of
A970/A970M-07
WK20167 Standard Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition
Proposed Withdrawal of
E256-98(2003)e1
WK20174 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
Proposed Revision of
A615/A615M-08a
WK20175 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
Proposed Revision of
A706/A706M-08
WK20176 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
Proposed Revision of
E855-90(2000)
WK20177 Standard Test Method for Hot Compression Properties of Gasket Materials
WK20182 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
Proposed Withdrawal of
D5467/D5467M-97(2004)
WK20183 Standard Specification for Highway Traffic Monitoring Devices
Proposed Revision of
E2300-06
WK20184 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
Proposed Revision of
D5491-03
WK20185 Standard Specification for Epoxy-Coated Steel Reinforcing Bars
Proposed Revision of
A775/A775M-07b
WK20186 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
Proposed Revision of
A884/A884M-06
WK20187 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
Proposed Revision of
A934/A934M-07
WK20188 Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength
Proposed Revision of
F2403-06
WK20189 Evaluating the Attributes of a Forest Management Plan
WK20191 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
Proposed Revision of
D5478-98(2003)
WK20192 Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials
Proposed Revision of
E1231-01(2006)
WK20195 Testing and Optimal Selection of Radiological Protection Garments
WK20198 Instrumented Impact Testing of Metallic Materials
WK20203 Standard Practice for Intersection Turning Movement Traffic Data
WK20204 Prepararing Laboratory Prints of Paste Inks by a Motor Driven Printability Tester
WK20209 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
Proposed Revision of
E1996-08
WK20211 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
Proposed Revision of
D7060-05
WK20213 Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
Proposed Revision of
E1994-98(2003)
WK20214 Standard Practice for Sampling a Stream of Product by Attributes Indexedby AQL
Proposed Revision of
E2234-05
WK20216 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample
Proposed Revision of
E2334-03e1
WK20217 Standard Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection
Proposed Revision of
E2555-07
WK20218 Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
Proposed Revision of
C288-87(2002)
WK20229 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
Proposed Revision of
C1029-07
WK20237 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
Proposed Revision of
A490-08a
WK20238 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
Proposed Revision of
A490M-04ae1
WK20239 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
Proposed Revision of
F1852-07
WK20240 Performance Graded Tire Rubber-Modified Asphalt Binder1
WK20241 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
Proposed Revision of
C1567-07
WK20242 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
Proposed Revision of
C1293-08a
WK20245 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Proposed Revision of
C578-08
WK20248 Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
Proposed Revision of
F1364-03e1
WK20252 Property Management System Outcomes
WK20263 Standard Specification for Application of Gypsum Sheathing
Proposed Revision of
C1280-07
WK20266 Purity of 1,3-Propanediol (Gas Chromatographic Method)
WK20267 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
Proposed Revision of
D6335-03b
WK20269 Standard Specification for Cellulosic Fiber Insulating Board
Proposed Revision of
C208-95(2001)
WK20271 Standard Specification for Rubber Insulating Covers
Proposed Revision of
D1049-98(2002)e1
WK20272 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
Proposed Revision of
D6906-03
WK20273 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
Proposed Revision of
A480/A480M-08
WK20274 Non-Specular (NS32)Surface Finish on Overhead Aluminum Electrical Conductors
WK20276 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
Proposed Revision of
B857-02
WK20277 Standard Guide for PDD Examination Standards of Practice
Proposed Revision of
E2062-07
WK20278 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
Proposed Revision of
D6316-04
WK20279 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT
Proposed Revision of
D7097-06a
WK20281 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
Proposed Revision of
E691-05
WK20283 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
Proposed Revision of
D2846/D2846M-06
WK20284 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
Proposed Revision of
D3385-03
WK20285 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
Proposed Revision of
D5298-03
WK20286 Standard Practice for Conducting Case Studies on Galvanized Structures
Proposed Revision of
A896-89(2004)
WK20287 Standard Specification for Methyl n-Amyl Ketone
Proposed Revision of
D4360-03
WK20288 Standard Specification for Isobutyl Acetate (95% Grade)
Proposed Revision of
D1718-03
WK20289 Standard Specification for n-Propyl Acetate (96 % Grade)
Proposed Revision of
D3130-03
WK20291 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
Proposed Revision of
D664-07
WK20293 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
Proposed Revision of
F1470-02
WK20294 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
Proposed Revision of
C610-07
WK20299 Standard Practice for Magnetic Particle Examination of Steel Forgings
Proposed Revision of
A275/A275M-07
WK20302 Standard Practice for Identification of Seized Drugs
Proposed Revision of
E2329-04
WK20303 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
Proposed Revision of
B247-02a
WK20304 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
Proposed Revision of
B247M-02a
WK20310 Standard Test Method for Ash in Analysis of Petroleum Coke
Proposed Revision of
D4422-03
WK20311 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
Proposed Revision of
D6969-03
WK20312 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
Proposed Revision of
D6970-03
WK20315 Standard Test Method for Galling Resistance of Materials
Proposed Withdrawal of
G98-02
WK20317 Standard Specification for Nonpowered Bicycle Trailers Designed for Human Passengers
Proposed Revision of
F1975-02
WK20318 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
Proposed Revision of
A742/A742M-03
WK20319 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
Proposed Revision of
A490M-04ae1
WK20321 Standard Test Method for Static Water Absorption of Leather
Proposed Revision of
D6015-00(2005)
WK20323 Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
Proposed Revision of
D5796-03
WK20325 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
Proposed Revision of
A926-03
WK20326 Standard Test Method for Leeb Hardness Testing of Steel Products
Proposed Revision of
A956-06
WK20327 Standard Test Method for Determination of 2,4-Toluene Diiso cyanate (2,4-TDI) and 2,6-Toluene Diiso cyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
Proposed Revision of
D5932-96(2002)
WK20328 Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
Proposed Revision of
B746/B746M-02(2007)
WK20329 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
Proposed Revision of
E398-03
WK20330 Describing and Specifying Inductively Coupled Plasma Mass Spectrometers
WK20332 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
Proposed Revision of
E292-01
WK20333 Classification and Reporting of Particulate Debris Extracted from In-Service Lubricant Samples
WK20334 Determination of Analyzer Site Precision
WK20335 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
Proposed Revision of
D3764-06e1
WK20336 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
Proposed Revision of
D6122-06e1
WK20337 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
Proposed Revision of
E126-05a
WK20339 Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
Proposed Revision of
D7151-05
WK20340 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
Proposed Revision of
D7011-04
WK20341 Standard Test Method for Shear Testing of Aluminum Alloys
Proposed Revision of
B769-07
WK20342 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
Proposed Revision of
A428/A428M-06
WK20343 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
Proposed Revision of
B221-06
WK20344 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
Proposed Revision of
B724-00(2006)
WK20345 Standard Test Method for Measuring Core Thickness of Textured Geomembrane
Proposed Revision of
D5994-98(2003)
WK20346 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
Proposed Revision of
D6243-06
WK20347 Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use
Proposed Revision of
F2569-07
WK20348 Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
Proposed Revision of
D7148-07
WK20349 Standard Specification for Chemical Admixtures for Concrete
Proposed Revision of
C494/C494M-08
WK20350 Standard Test Method for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength
Proposed Revision of
C563-07
WK20351 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
Proposed Revision of
F2592-07a
WK20352 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
Proposed Revision of
C1497-04
WK20353 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
Proposed Revision of
C1512-07
WK20354 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
Proposed Revision of
C1667-07
WK20355 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
Proposed Revision of
C518-04
WK20356 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
Proposed Revision of
D130-04e1
WK20357 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
Proposed Revision of
D1002-05
WK20358 Standard Test Method for Microindentation Hardness of Materials
Proposed Revision of
E384-08a
WK20359 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
Proposed Revision of
E1290-07e1
WK20360 Standard Practice for Strain-Controlled Fatigue Testing
Proposed Revision of
E606-04e1
WK20361 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
Proposed Revision of
E466-07
WK20362 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
Proposed Revision of
D4417-03
WK20363 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
Proposed Revision of
D7245-07e1
WK20364 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
Proposed Revision of
E399-06e2
WK20365 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
Proposed Revision of
C1536-03
WK20366 Standard Test Method for Measurement of Resilient Floor Plank by Dial Gage
Proposed Revision of
F2421-05
WK20367 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
Proposed Revision of
F386-02
WK20368 Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
Proposed Revision of
F387-02
WK20369 Standard Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed Text
Proposed Revision of
E2287-03
WK20370 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
Proposed Revision of
D2216-05
WK20371 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating
Proposed Revision of
D4643-08
WK20372 Standard Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed Text
Proposed Revision of
E2287-03
WK20373 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating
Proposed Revision of
D4959-07
WK20374 Standard Guide for Physical Match of Paper Cuts, Tears, and Perforations in Forensic Document Examinations
Proposed Revision of
E2288-03
WK20375 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
Proposed Revision of
D1556-07
WK20376 Standard Guide for Physical Match of Paper Cuts, Tears, and Perforations in Forensic Document Examinations
Proposed Revision of
E2288-03
WK20377 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
Proposed Revision of
D6938-08
WK20378 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
Proposed Revision of
D2167-08
WK20379 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
Proposed Revision of
D2937-04
WK20380 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
Proposed Revision of
D6780-05
WK20384 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
Proposed Revision of
D5969-05e2
WK20385 Determination of Total Glycerin in Biodiesel (B-100) by Liquid Chromatography
WK20388 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
Proposed Revision of
C1517-02
WK20389 Standard Practices for Force Verification of Testing Machines
Proposed Revision of
E4-07
WK20390 Standard Practices for Force Verification of Testing Machines
Proposed Revision of
E4-07
WK20391 Standard Practices for Force Verification of Testing Machines
Proposed Revision of
E4-07
WK20392 Standard Practices for Force Verification of Testing Machines
Proposed Revision of
E4-07
WK20394 Standard Practices for Force Verification of Testing Machines
Proposed Revision of
E4-07
WK20398 Standard Practice for Reducing Samples of Aggregate to Testing Size
Proposed Revision of
C702-98(2003)
WK20404 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
Proposed Revision of
D6390-05
WK20409 Standard Test Method for Staining of Porous Substrate by Joint Sealants
Proposed Revision of
C1248-08
WK20410 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
Proposed Revision of
D3306-08a
WK20416 Standard Method for Determining Thermal Neutron Reaction and Fluence Rates by Radioactivation Techniques
Proposed Revision of
E262-03
WK20417 Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
Proposed Revision of
D2489-02
WK20434 Standard Practice for Neutron Radiation Damage Simulation by Charged-Particle Irradiation
Proposed Revision of
E521-96(2003)
WK20436 Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
Proposed Revision of
E821-96(2003)
WK20437
Proposed Revision of
WK20438 Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
Proposed Revision of
D5030-04
WK20439 Interface of Active Vehicle Barriers and Automated Access Control Systems.
WK20442 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
Proposed Revision of
E2515-07
WK20443 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
Proposed Revision of
D3306-08a
WK20444 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
Proposed Revision of
D4985-05
WK20446 Standard Specification for Sheet Materials for Curing Concrete
Proposed Revision of
C171-07
WK20448 Standard Guide for Using Existing Practices in Developing and Writing Test Methods (Withdrawn 2009)
Proposed Withdrawal of
D4270-95(2001)
WK20449 Standard Practice for Writing Statements on Sampling in Test Methods for Textiles (Withdrawn 2009)
Proposed Withdrawal of
D4271-88(2001)
WK20450 Standard Practice for Interlaboratory Testing of a Textile Test Method That Produces Non-Normally Distributed Data
Proposed Withdrawal of
D4467-94(2001)
WK20451 Standard Guide for Identification and Transformation of Frequency Distributions
Proposed Withdrawal of
D4686-91(2003)
WK20452 Standard Guide for Maintaining Test Methods in the User's Laboratory
Proposed Withdrawal of
D4697-95(2001)
WK20453 Standard Guide for Estimating the Magnitude of Variability from Expected Sources in Sampling Plans
Proposed Withdrawal of
D4854-95(2001)
WK20455 Standard Guide for Conducting Wear Tests on Textiles
Proposed Withdrawal of
D3181-95(2002)
WK20456 Standard Terminology of Seams and Seam Finishes in Home Sewing
Proposed Withdrawal of
D4965-96(2002)
WK20457 Standard Terminology of Textile Conservation
Proposed Withdrawal of
D5038-01
WK20458 Standard Practice for Pretreatment of Backing Fabrics Used in Textile Conservation Research
Proposed Withdrawal of
D5429-04
WK20459 Standard Terminology of Basic Sewing Machine Stitches for Home Use
Proposed Withdrawal of
D5646-96(2002)
WK20460 High Performance Tinned Coated Annealed Copper Wire intended for Electrical and Electronic Application for Solderability
WK20461 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
Proposed Revision of
D6142-03
WK20462 Standard Specification for Tin Mill Products, General Requirements
Proposed Revision of
A623-08
WK20463 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
Proposed Revision of
D5949-01e1
WK20465 Standard Test Method for Assay of Peroxy Esters-Catalyzed Iodometric Procedure
Proposed Revision of
E1228-94(2003)e1
WK20466 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
Proposed Revision of
D3549-03
WK20467 Standard Practice for Sampling Industrial Chemicals
Proposed Revision of
E300-03
WK20468 Standard Terminology Relating to Industrial and Specialty Chemicals
Proposed Revision of
E1547-99(2003)
WK20470 Aviation Fuels from Synthethesized Hydrocarbons
WK20472 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
Proposed Revision of
C25-06
WK20473 Standard Performance Specification for Padlocks
Proposed Revision of
F883-04
WK20474 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
Proposed Revision of
D6222-02e2
WK20477 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
Proposed Revision of
D6994-04
WK20479 Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
Proposed Revision of
A729/A729M-06
WK20480 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
Proposed Revision of
A888-08
WK20487 General Practice for Magnetic Particle Inspection, Non-Aerospace
WK20488 Standard Test Method for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength
Proposed Revision of
C563-07
WK20490 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
Proposed Revision of
D6926-04
WK20491 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
Proposed Revision of
A463/A463M-06
WK20492 Measuring the Time-Dependent Modulus of Sealant Using Stress Relaxation
WK20493 Standard Specification for Copper-Nickel Alloy Castings
Proposed Revision of
B369-06
WK20494 Guide for the Evaluation of Installed Joint Sealants
WK20495 Standard Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications
Proposed Revision of
B715-96(2001)
WK20496 Standard Specification for Materials for Nonferrous Powder Metallurgy (P/M) Structural Parts
Proposed Revision of
B823-01
WK20498 Multivariate Statistical Process Control for Manufacturing Processes
WK20499 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
Proposed Revision of
A990-08
WK20502 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
Proposed Revision of
E162-08
WK20522 Standard Specification for Functional Additions for Use in Hydraulic Cements
Proposed Revision of
C688-00(2005)
WK20524 Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
Proposed Revision of
C1038-04
WK20529 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
Proposed Revision of
E1074-06e1
WK20531 Contact Ultrasonic Testing of Welds Using Phased Arrays
WK20532 Measurement of the Performance of Hydrodynamic Stormwater Treatment Devices Under Conditions of Pre-existing Sediment Loading
WK20533 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-06a
WK20534 Standard Specification for Geosynthetic Alternate Daily Covers
Proposed Revision of
D7008-03
WK20535 Responder Family Support Services
WK20536 Private Sector Owned Public Assembly Venue Preparedness
WK20537 Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Eddy Current Test Methods
WK20538 Standard Guide for Developing a Disaster Recovery Plan for Medical Transcription Departments and Businesses1
WK20539 Counting and Sizing Particles in Light and Middle Distillate fuels, and Liquid Bio Fuels, by Automatic Particle Counter
WK20542 Standard Terminology Relating to Nonsieving Methods of Powder Characterization
Proposed Revision of
E2589-08
WK20543 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
Proposed Revision of
C430-96(2003)
WK20544 Certificate Programs
WK20545 Standard Practice for Data Collection for Sustainability Assessment of Building Products
Proposed Revision of
E2129-05
WK20546 Standard Practice for Data Collection for Sustainability Assessment of Building Products
Proposed Revision of
E2129-05
WK20547 Laser-Fused Stainless Steel Bars and Shapes
WK20548 Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures
Proposed Revision of
D2063-91(2002)
WK20549 Standard Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials
Proposed Revision of
D5506-98(2003)
WK20550 Steel Blades Used With the Photovoltaic Module Surface Cut Test
WK20558 Standard Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials
Proposed Revision of
D4887-99(2003)
WK20560 Standard Practice for Mechanical Collection and Within-System Preparation of a Gross Sample of Coal from Moving Streams (Withdrawn 2008)
Proposed Withdrawal of
D7256/D7256M-08
WK20561 Standard Practice for Mechanical Auger Sampling (Withdrawn 2008)
Proposed Withdrawal of
D4916-04
WK20562 Standard Practice for Quality Management of Mechanical Coal Sampling Systems (Withdrawn 2008)
Proposed Withdrawal of
D4702-07
WK20563 Standard Practice for Bias Testing a Mechanical Coal Sampling System (Withdrawn 2008)
Proposed Withdrawal of
D6518-07
WK20564 Adventitious agent safety in xenogeneic TEMPs
WK20565 Standard Terminology of Appearance
Proposed Revision of
E284-07
WK20567 Training for a Level I Mounted Search Team Member
WK20568 Standard Terminology of Appearance
Proposed Revision of
E284-07
WK20570 Standard Practice for Soil Investigation and Sampling by Auger Borings
Proposed Revision of
D1452-07a
WK20571 Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
Proposed Revision of
E1188-05
WK20572 Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory
Proposed Revision of
E1492-05
WK20573 Standard Terminology Relating to Textiles
Proposed Revision of
D123-07
WK20580 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
Proposed Revision of
A653/A653M-07
WK20581 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
Proposed Revision of
A792/A792M-08
WK20582 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
Proposed Revision of
A653/A653M-07
WK20583 Standard Test Methods for Chemical Analysis of Hydraulic Cement
Proposed Revision of
C114-07
WK20603 Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures
Proposed Revision of
E1925-04
WK20609 Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring and Vapor Intrusion Evaluations1
WK20621 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
Proposed Revision of
E1623-04
WK20623 Standard Practice for Design of Amusement Rides and Devices
Proposed Revision of
F2291-06a
WK20629 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
Proposed Revision of
E2303-03
WK20630
Proposed Revision of
E1400
WK20631 Estimation of Breaking Energy for a Tire Deformed by a Slow-Moving Plunger
WK20632 Coding Plastic Items for Resin Identification Purposes
WK20633 Standard Test Method for Cell Size of Rigid Cellular Plastics
Proposed Revision of
D3576-04
WK20636 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
Proposed Revision of
C1077-07a
WK20637 Standard Practice for Ownership and Operation of Amusement Rides and Devices
Proposed Revision of
F770-06a
WK20640 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
Proposed Revision of
A471-06
WK20641 Cautionary Labeling of Inflatable Air Mattresses
WK20642 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
Proposed Revision of
C1077-07a
WK20644 Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
Proposed Revision of
D4822-88(2003)
WK20645 Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
Proposed Revision of
D3975-93(2003)
WK20662 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
Proposed Revision of
B591-08
WK20663 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
Proposed Revision of
B171/B171M-04e1
WK20665 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
Proposed Revision of
D6243-06
WK20666 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
Proposed Revision of
D6243-06
WK20671 Cold Formed Carbon and Alloy Structural Steel Tubing Made From Precoated Sheet Steel
WK20673 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
Proposed Revision of
F2408-07
WK20674 Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities
Proposed Revision of
F2007-07a
WK20675 Standard Terminology Relating to Metallography
Proposed Revision of
E7-03
WK20676 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
Proposed Revision of
F2374-07a
WK20677 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
Proposed Revision of
F2374-07a
WK20679 TEXTILE FIBER SOURCES
WK20681 Standard Practice for Magnetic Particle Testing
Proposed Revision of
E1444-05
WK20683 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
Proposed Revision of
C361-05e1
WK20684 Corrosion Protective Coating Aluminum Organic Type
WK20685 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
Proposed Revision of
C361-05e1
WK20692 Standard Test Method for Measurement of Fracture Toughness
Proposed Revision of
E1820-08
WK20693 Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
Proposed Revision of
D3381-05
WK20694 Standard Practice for Resistance of Plastics to Sulfide Staining
Proposed Revision of
D1712-03
WK20695 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
Proposed Revision of
F468-06e1
WK20696 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
Proposed Revision of
D6186-98(2003)e1
WK20698 Standard Specification for Alloy Steel Socket-Head Cap Screws
Proposed Revision of
A574-04e1
WK20701 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
Proposed Revision of
F835-04e1
WK20710 Standard Guide for Development of Fire-Hazard-Assessment Standards
Proposed Revision of
E1546-07
WK20713 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
Proposed Revision of
C40-04
WK20715 Standard Test Method for Lightweight Particles in Aggregate
Proposed Revision of
C123-04
WK20717 Standard Specification for Agencies Performing Nondestructive Testing
Proposed Revision of
E543-08
WK20718 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
Proposed Revision of
C142-97(2004)
WK20720 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
Proposed Revision of
C1433M-08
WK20723 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
Proposed Revision of
G178-03
WK20724 Standard Specification for Aggregates for Radiation-Shielding Concrete
Proposed Withdrawal of
C637-98a(2003)
WK20725 Standard Descriptive Nonmenclature of Constituents of Aggregates for Radiation-Shielding Concrete
Proposed Withdrawal of
C638-92(2002)
WK20726 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
Proposed Withdrawal of
C937-02
WK20727 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
Proposed Withdrawal of
C938-02
WK20728 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
Proposed Revision of
D847-04
WK20729 Standard Practice for Stitches and Seams
Proposed Revision of
D6193-97(2004)
WK20731 Standard Specification for Portland Cement
Proposed Revision of
C150-07
WK20732 Standard Test Methods for Relative Density of Gaseous Fuels
Proposed Revision of
D1070-03
WK20733 Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
Proposed Revision of
D1826-94(2003)
WK20734 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
Proposed Revision of
D3588-98(2003)
WK20735 Standard Specification for Diesel Fuel Oils
Proposed Revision of
D975-08
WK20736 Determination of Moisture in Lubricating Oils and Additives by Relative Humidity Sensor
WK20737 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
Proposed Revision of
D6455-05
WK20739 Standard Specification for Diesel Fuel Oils
Proposed Revision of
D975-08
WK20740 Best Practices for Safe Application of 3D Imaging Technology
WK20741 Standard Specification for Portland Cement
Proposed Revision of
C150-07
WK20745 Standard Specification for Fuel Oils
Proposed Revision of
D396-08
WK20753 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
Proposed Revision of
C1609/C1609M-07
WK20754 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis
Proposed Revision of
E1824-08
WK20765 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
Proposed Revision of
C1674-08
WK20768 Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)
WK20769 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
Proposed Revision of
C1077-07a
WK20770 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
Proposed Revision of
C1077-07a
WK20772 Standard Terminology of Concrete Masonry Units and Related Units (Withdrawn 2009)
C1209-05e1
Replacement with C1232-08
WK20773 Standard Terminology of Structural Clay Products (Withdrawn 2009)
C43-08
Replacement with C1232-08
WK20774 Standard Practice for Capping Cylindrical Concrete Specimens
Proposed Revision of
C617-98(2003)
WK20775 Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
Proposed Withdrawal of
C940-98a(2003)
WK20776 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
Proposed Withdrawal of
C941-02
WK20777 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
Proposed Withdrawal of
C943-02
WK20780 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock
Proposed Revision of
D5434-03
WK20783 Standard Test Method for Surface Burning Characteristics of Building Materials
Proposed Revision of
E84-08a
WK20784 Standard Specification for Performance of Engine Oils
Proposed Revision of
D4485-08
WK20786 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
Proposed Revision of
C989-06
WK20787 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
Proposed Revision of
C989-06
WK20788 Standard Test Method for Cloud Point of Nonionic Surfactants
Proposed Revision of
D2024-65(2003)
WK20789 Standard Terminology Relating to Wear and Erosion
Proposed Revision of
G40-05
WK20799 Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
Proposed Revision of
D1337-04
WK20800 Standard Test Method for Nonvolatile Content of Aqueous Adhesives
Proposed Revision of
D1489-97(2004)
WK20803 Standard Test Methods for Fire Tests of Building Construction and Materials
Proposed Revision of
E119-08a
WK20804 Quantification of Air Intrusion in Low-Sloped Roofing Assemblies
WK20805 Standard Practice for Petrographic Examination of Hardened Concrete
Proposed Revision of
C856-04
WK20806 Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
Proposed Revision of
A805-08
WK20807 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time
Proposed Revision of
D6794-02(2007)
WK20808 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30-min) Heating Time
Proposed Revision of
D6795-02(2007)
WK20809 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
Proposed Revision of
D6891-06a
WK20810 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
Proposed Revision of
D6923-05
WK20811 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
Proposed Revision of
D7156-07a
WK20812 Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine
Proposed Revision of
D6202-02
WK20813 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
Proposed Revision of
D6557-04
WK20814 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
Proposed Revision of
D6593-07a
WK20815 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
Proposed Revision of
D6709-07
WK20816 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine
Proposed Revision of
D6837-08
WK20817 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
Proposed Revision of
D6984-08
WK20818 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
Proposed Revision of
D7320-08
WK20819 Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine
Proposed Revision of
D5862-06
WK20820 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
Proposed Revision of
D5966-08
WK20821 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
Proposed Revision of
D5967-08
WK20822 Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine
Proposed Revision of
D6483-04
WK20823 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
Proposed Revision of
D6618-05
WK20824 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine-Caterpillar 1P Test Procedure
Proposed Revision of
D6681-05
WK20825 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine-1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
Proposed Revision of
D6750-06
WK20826 Standard Test Method for Cummins M11 High Soot Test
Proposed Revision of
D6838-04
WK20827 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
Proposed Revision of
D6894-03
WK20828 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
Proposed Revision of
D5662-08
WK20830 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants
Proposed Revision of
D4682-87(2002)
WK20831 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
Proposed Revision of
D4858-02
WK20832 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC
Proposed Revision of
D4859-97(2003)
WK20833 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
Proposed Revision of
D4863-02
WK20834 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
Proposed Revision of
D7216-08
WK20835 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
Proposed Revision of
D5579-06
WK20836 Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
Proposed Revision of
D7038-08
WK20837 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
Proposed Revision of
D5704-07
WK20838 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
Proposed Revision of
D6121-08
WK20839 Standard Test Method for Cummins M11 EGR Test
Proposed Revision of
D6975-04
WK20840 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
Proposed Revision of
D4857-03
WK20849 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
Proposed Revision of
A606-04
WK20850 Standard Specification for Steel, Sheet, for Porcelain Enameling
Proposed Revision of
A424-06
WK20851 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
Proposed Revision of
A635/A635M-07
WK20852 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
Proposed Revision of
A1018/A1018M-07
WK20853 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
Proposed Revision of
A414/A414M-07
WK20854 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
Proposed Revision of
A414/A414M-07
WK20855 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
Proposed Revision of
D1405-01(2006)
WK20857 Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger
Proposed Revision of
F414-06
WK20858 Standard Practice for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
Proposed Revision of
A1038-05
WK20859 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
Proposed Revision of
F2023-08
WK20860 Standard Practice for Accelerated Aging of Inflatable Restraint Fabrics
Proposed Revision of
D5427-03(2007)
WK20863 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
Proposed Revision of
C871-08
WK20864 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
Proposed Revision of
C871-08
WK20865 Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
Proposed Revision of
F2657-07
WK20866 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
Proposed Revision of
E1164-07
WK20867 Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
Proposed Revision of
F137-03(2007)
WK20868 Standard Test Method for Deflection of Resilient Floor Tile
Proposed Revision of
F1304-03
WK20870 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
Proposed Revision of
D2803-03
WK20871 Standard Test Method for Impact Resistance of Plastic Sew-Through Flange Buttons
Proposed Revision of
D5171-00(2006)
WK20872 Colorimetric/Spectrophotometric Method to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram, and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves
WK20873 Standard Test Method for Impact Resistance of Plastic Sew-Through Flange Buttons
Proposed Revision of
D5171-00(2006)
WK20885 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
Proposed Revision of
F86-04
WK20886 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
Proposed Revision of
C1088-07a
WK20887 Standard Specification for Fuel Oils
Proposed Revision of
D396-08
WK20888 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
Proposed Revision of
F1807-08
WK20899 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
Proposed Revision of
E1875-00e1
WK20902 Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
Proposed Revision of
D6477-04
WK20903 Standard Test Methods for Degree of Filament Yarn Entanglement by Needle Insertion Methods
Proposed Revision of
D4724-99(2005)
WK20904 Standard Test Method for Arsenic in Paint (Withdrawn 2009)
Proposed Withdrawal of
D2348-02
WK20906 Standard Specification for Fuel Oils
Proposed Revision of
D396-08
WK20907 Standard Specification for Fuel Oils
Proposed Revision of
D396-08
WK20908 Standard Test Method for Water Penetration and Leakage Through Masonry
Proposed Revision of
E514-08
WK20909 Standard Specification for Copper Alloys in Ingot Form
Proposed Revision of
B30-08
WK20913 Standard Terminology Relating to Body Dimensions for Apparel Sizing
Proposed Revision of
D5219-07a
WK20915 Standard Tables of Body Measurements for Men Sizes Thirty-Four to Sixty (34 to 60) Regular
Proposed Revision of
D6240-98(2006)
WK20917 Standard Specification for Reflective Insulation for Building Applications
Proposed Revision of
C1224-03
WK20918 Standard Test Method for Measurement of Fracture Toughness
Proposed Revision of
E1820-08
WK20920 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
Proposed Revision of
D4239-08
WK20921 Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
Proposed Revision of
D5016-08
WK20923 Sampling of Fabricated and Cast Aluminum Product
WK20927 Standard Guide for Listing Relevant Standards and Publications for Commercial Shipbuilding
Proposed Revision of
F1547-06
WK20933 Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
Proposed Revision of
C950-05
WK20936 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
Proposed Revision of
D6300-07
WK20937 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
Proposed Revision of
D6300-07
WK20940 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
Proposed Revision of
E1333-96(2002)
WK20946 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
Proposed Revision of
D6448-04
WK20947 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
Proposed Revision of
A480/A480M-08a
WK20949 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
Proposed Revision of
D3228-05
WK20958 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
Proposed Revision of
D4629-02(2007)
WK20959 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
Proposed Revision of
D5762-05
WK20960 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
Proposed Revision of
D1552-07
WK20961 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
Proposed Revision of
F606-07
WK20971 Standard Guide for Format of Computerized Exchange of Soil and Rock Test Data (Withdrawn 2008)
Proposed Withdrawal of
D6453-99
WK20972 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
Proposed Revision of
A792/A792M-08
WK20978 Standard Test Method to Measure Heat Transfer Through Textile Thermal Barrier Materials
Proposed Revision of
D7140-07
WK20979 Standard Terminology for F16 Mechanical Fasteners
Proposed Revision of
F1789-07c
WK20983 Standard Test Method for Sulfide Ion in Water
Proposed Revision of
D4658-03
WK20984 Measuring Soluble Cations (SC), Bound Cations (BC) and Cation Exchange Capacity (CEC) of Inorganic Fine-Grained Soils
WK20992 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
Proposed Revision of
A764-07
WK20996 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
Proposed Revision of
D6299-07
WK20999 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
Proposed Revision of
E398-03
WK21001 Size of Aggregate Used as Ballast for Single-ply Membrane Roof Systems
WK21002 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
Proposed Revision of
F959-07a
WK21003 Tangible Property Mobility Index
WK21006 Maximum Lead Content in Synthetic Turf Fibers
WK21012 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
Proposed Revision of
A876-03
WK21017 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
Proposed Revision of
F1446-08
WK21019 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
Proposed Revision of
D6759-07
WK21020 Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
Proposed Revision of
C1325-08
WK21021 Standard Practice for Preparing Coal Samples for Analysis
Proposed Revision of
D2013-07
WK21026 Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
WK21027 Standard Test Method for Iron Bacteria in Water and Water-Formed Deposits
Proposed Withdrawal of
D932-85(2002)
WK21028 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
Proposed Withdrawal of
D4012-81(2002)
WK21029 Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
Proposed Withdrawal of
D4412-84(2002)
WK21030 Standard Test Method for Simultaneous Enumeration of Total and Respiring Bacteria in Aquatic Systems by Microscopy
Proposed Withdrawal of
D4454-85(2002)
WK21031 Standard Test Method for Enumeration of Aquatic Bacteria by Epifluorescence Microscopy Counting Procedure
Proposed Withdrawal of
D4455-85(2002)
WK21032 Standard Practice for Recovery of Viruses from Wastewater Sludges
Proposed Withdrawal of
D4994-89(2002)
WK21033 Standard Test Method for Detection and Enumeration of Clostridium perfringens from Water and Extracted Sediments by Membrane Filtration (MF)
Proposed Withdrawal of
D5916-96(2002)
WK21034 Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
WK21035 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
Proposed Revision of
D3311-06a
WK21039 Standard Specification for Stainless Steel Billets and Bars for Forging
Proposed Revision of
A314-97(2002)
WK21054 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
Proposed Revision of
A123/A123M-02
WK21055 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
Proposed Revision of
A153/A153M-05
WK21056 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
Proposed Revision of
A385-08
WK21057 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
Proposed Revision of
A780-01(2006)
WK21058 Standard Practice for Conducting Case Studies on Galvanized Structures
Proposed Revision of
A896-89(2004)
WK21060 Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)
Proposed Revision of
D6064-03
WK21061 Standard Specification for HFC-23 (Trifluoromethane, CHF3)
Proposed Revision of
D6126-97(2003)e1
WK21062 Standard Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF3)
Proposed Revision of
D6127-03
WK21063 Standard Specification for HFC-125 (Pentafluoroethane, C2HF5)
Proposed Revision of
D6231-98(2003)
WK21064 Standard Test Method for Molding Index of Thermosetting Molding Powder (Withdrawn 2008)
Proposed Revision of
D731-95(1999)
WK21065 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials
Proposed Revision of
D5336-03
WK21073 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
Proposed Revision of
A385-08
WK21075 Standard Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems
Proposed Revision of
F1704-05
WK21092 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
Proposed Revision of
E1876-07
WK21094 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
Proposed Revision of
C78-08
WK21095 Standard Guide for Environmental Site Assessments: Phase II Environmental Site Assessment Process
Proposed Revision of
E1903-97(2002)
WK21096 DISCLOSURES RELATED TO CLIMATE CHANGE EXPOSURES/RISKS
WK21098 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
Proposed Revision of
A153/A153M-05
WK21102 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-07a
WK21103 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
Proposed Revision of
A941-06a
WK21104 Standard Specification for Design and Performance of a Light Sport Airplane
Proposed Revision of
F2245-07a
WK21105 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
Proposed Revision of
A941-06a
WK21106 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
Proposed Revision of
F1345-96(2008)
WK21107 Standard Specification for Corrugated Aluminum Box Culverts
Proposed Revision of
B864/B864M-00(2007)
WK21108 Standard Practice for Installation of Chain-Link Fence
Proposed Revision of
F567-07
WK21109 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
Proposed Revision of
D4802-02
WK21113 Standard Specification for Eye Protectors For Selected Sports
Proposed Revision of
F803-03
WK21114 Structural Performance of Thermal Barriers in Aluminum Fenestration Products
WK21121 Standard Guide for Selecting Components for Energy-Dispersive X-Ray Fluorescence (XRF) Systems (Withdrawn 2008)
Proposed Withdrawal of
C982-03
WK21124 Shear Modulus and Damping of Soils using the Torsional Resonant-Column Method at Low Cyclic Shear Strains
WK21130 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
Proposed Revision of
C289-07
WK21131 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
Proposed Revision of
E2058-06
WK21132 Standard Test Method for the Determination of Uranium or Gadolinium, or Both, in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF)
Proposed Revision of
C1456-00
WK21133 Standard Test Method for Evaluating Paintball Barrier Netting
Proposed Revision of
F2278-03
WK21134 Paintball Player Safety Briefing
WK21136 Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
Proposed Revision of
E651/E651M-01
WK21137 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components
Proposed Revision of
E699-03
WK21140 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing
Proposed Revision of
E329-07ae1
WK21141 Compacted, Mineral-Insulated, Metal-Sheathed Cable used in Industrial Resistance Thermometers
WK21142 Determination of Re-Tack Ability in Carpet Adhesives
WK21144 Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
Proposed Revision of
D4867/D4867M-04
WK21146 Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals
Proposed Revision of
E180-03
WK21147 Standard Guide for Marine Vessel Structural Inspection Considerations
Proposed Revision of
F1754-97(2004)
WK21148 Standard Test Method for Surface Water Absorption of Terry Fabrics (Water Flow)
Proposed Revision of
D4772-97(2004)
WK21149 Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
Proposed Revision of
D5278-98(2004)
WK21150 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
Proposed Revision of
D1424-07a
WK21151 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
Proposed Revision of
D3776-07
WK21152 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
Proposed Revision of
D4032-08
WK21153 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
Proposed Revision of
D4158-08
WK21154 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
Proposed Revision of
D5034-08
WK21156 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad
Proposed Revision of
D3514-05
WK21161 Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
Proposed Revision of
F1043-06
WK21162 Standard Test Method for the Characterization of Particles from Hydrogen Fuel Streams by Scanning Electron Microscope
WK21163 Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses
WK21167 Standard Terminology for Membrane Switches
Proposed Revision of
F2112-02
WK21168 Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
Proposed Revision of
D5278-98(2004)
WK21170 Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
Proposed Revision of
F2187-02
WK21171 Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
Proposed Revision of
F2188-02
WK21172 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
Proposed Revision of
D3776-07
WK21173 Testing Inkjet Cartridge Latency (Start-Up)
WK21174 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
Proposed Revision of
C1129-89(2001)
WK21178 Standard Practice for An Object-Oriented Model for Registration, Admitting, Discharge, and Transfer (RADT) Functions in Computer-Based Patient Record Systems
Proposed Revision of
E1715-01
WK21183 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
Proposed Revision of
B283-08
WK21184 Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants
Proposed Revision of
F2224-03
WK21186 Standard Test Method for Reflection Haze of High-Gloss Surfaces
Proposed Revision of
D4039-93(2004)
WK21187 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
Proposed Revision of
C138/C138M-08
WK21188 Standard Test Method for Slump of Hydraulic-Cement Concrete
Proposed Revision of
C143/C143M-08
WK21189 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
Proposed Revision of
C173/C173M-08
WK21191 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
Proposed Revision of
C231-08b
WK21196 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
WK21197 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
Proposed Revision of
A930-03
WK21201 Measurement of Initiation Fracture Toughness of Surface Cracks
WK21202 Standard Test Method for Air Release Properties of Petroleum Oils
Proposed Revision of
D3427-07
WK21203 Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps
Proposed Revision of
F2132-01(2008)e1
WK21204 the selection and use of wide-band, low temperature infrared thermometers
WK21205 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
Proposed Revision of
C25-06
WK21206 Dimensions of Knife-edge flanges
WK21207 Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test)
Proposed Revision of
D6588-02
WK21209 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Examination of Metal and Metal Alloy Production Material
Proposed Revision of
E1158-04
WK21210 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
Proposed Revision of
F2023-08
WK21211 Education and Training in Digital Forensics
WK21212 Standard Specification for Performance of Manual Transmission Gear Lubricants
Proposed Revision of
D5760-05
WK21215 Standard Specification for Metal Lath
Proposed Revision of
C847-06
WK21216 Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather
Proposed Revision of
D2868-07
WK21217 Standard Terminology of Appearance
Proposed Revision of
E284-08
WK21218 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-08
WK21219 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-08
WK21220 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-08
WK21221 Analysis of Thermal Setting Time Data
WK21223 Precast Concrete Tanks by the Negative Air Pressure (Vacuum) Test Prior to Backfill
WK21225 Standard Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin
Proposed Withdrawal of
D6181-03
WK21227 Standard Test Methods for Water Vapor Diffusion Resistance and Air Flow Resistance of Clothing Materials Using the Dynamic Moisture Permeation Cell
Proposed Revision of
F2298-03
WK21229 Standard Practice for Making and Curing Concrete Test Specimens in the Field
Proposed Revision of
C31/C31M-08a
WK21231 Standard Specification for Full-Size Baby Crib
Proposed Revision of
F1169-07
WK21235 Standard Consumer Safety Performance Specification for Carriages and Strollers
Proposed Revision of
F833-07a
WK21237 Standard Practice for Extrapolating Reactor Vessel Surveillance Dosimetry Results, E706(IC)
Proposed Withdrawal of
E560-01
WK21238 Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems
Proposed Revision of
F1649-96(2003)
WK21239 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-08
WK21240 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-08
WK21241 Standard Practice for Mechanical Sampling of Coal
Proposed Revision of
D7430-08
WK21244 Standard Guide for Writing Material Standards in the Classification D4000 Format
Proposed Revision of
D5740-03
WK21245 Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
Proposed Revision of
C303-07
WK21246 Behavior of Materials in a Vertical Tube Furnace at 750C with a Cone-Shaped Airflow Stabilizer
WK21247 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
Proposed Revision of
D2809-04e2
WK21248 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
Proposed Revision of
D2158-05
WK21250 Practice for Specimen Preparation and Mounting of Caulks & Sealants to Assess Surface Burning Characteristics
WK21251 Evaluating Rim Slip Performance For Light Truck Tires
WK21252 Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
WK21253 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
Proposed Revision of
F2170-02
WK21254 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
Proposed Revision of
F2170-02
WK21255 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
Proposed Revision of
F2170-02
WK21256 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
Proposed Revision of
F2170-02
WK21257 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
Proposed Revision of
D1974-98(2003)
WK21260 Standard Guide for Minimum Training Requirements for Forensic Document Examiners
Proposed Revision of
E2388-05
WK21261 Standard Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
Proposed Revision of
D7043-04a
WK21262 Standard Terminology Relating to Fatigue and Fracture Testing
Proposed Revision of
E1823-07a
WK21264 Determination of Adenosine Triphosphate (ATP) in Water-Miscible Metalworking Fluids
WK21265 Standard Specification for Wrought Stainless Steels for Surgical Instruments
Proposed Revision of
F899-07
WK21266 Standard Test Method for Recovery of Asphalt From Solution by Abson Method
Proposed Revision of
D1856-95a(2003)
WK21267 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
Proposed Revision of
D3542-92(2007)
WK21268 Standard Consumer Safety Performance Specification for Home Playground Equipment
Proposed Revision of
F1148-05
WK21271 Standard Specification for Refined Lead
Proposed Revision of
B29-03
WK21272 Standard Test Method for Slump Flow of Self-Consolidating Concrete
Proposed Revision of
C1611/C1611M-05
WK21273 Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
Proposed Revision of
C1621/C1621M-08
WK21276 Polyethylene Pipe with a Co-extruded Polyamide Inner and/or Outer Barrier Layer for Oil and Gas Applications (Project 11-08-04)
WK21277 Evaluating the Fire Test Response of Deck Structures to Burning Brands
WK21280 Standard Terminology of Appearance
Proposed Revision of
E284-08
WK21281 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
Proposed Revision of
F1487-07ae1
WK21282 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
Proposed Revision of
F1487-07ae1
WK21283 Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
Proposed Revision of
F2373-08
WK21285 Standard Guide for Modeling the Colorimetric Properties of a Visual Display Unit
Proposed Revision of
E1682-05
WK21304 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
Proposed Revision of
C754-07
WK21305 Standard Test Method for Flame Resistance of Textiles (Vertical Test)
Proposed Revision of
D6413-08
WK21306 Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
Proposed Revision of
F1043-06
WK21307 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
Proposed Revision of
E1921-08a
WK21314 Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography
Proposed Revision of
D5501-04
WK21315 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
Proposed Revision of
A615/A615M-08a
WK21317 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
Proposed Revision of
A820/A820M-06
WK21318 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
Proposed Revision of
C110-08
WK21319 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
Proposed Revision of
C110-08
WK21320 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
Proposed Revision of
D3666-07ae1
WK21321 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
Proposed Revision of
D3740-08
WK21323 John Deere Coolant Cavitation Test
WK21326 Standard Test Method for Measurement of Radio Frequency Induced Heating Near Passive Implants During Magnetic Resonance Imaging
Proposed Revision of
F2182-02a
WK21327 the Installation of Roof Mounted Photovoltaic Arrays
WK21336 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
Proposed Revision of
F2389-07e1
WK21337 Standard Test Method for Determining Demulsibility of Emulsified Asphalt
Proposed Revision of
D6936-04
WK21339 Analysis of 1,3 Propanediol by Gas Chromatography
WK21340 Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints
Proposed Withdrawal of
F704-81(2001)
WK21341 Assessing the Uncertainty of Measurements to Determine Volatile Organic Emissions from Indoor Materials/Products
WK21342 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
Proposed Revision of
F480-06b
WK21343 Evaluating the Ability of Vents to Resist Entry of Embers and Flame Impingement
WK21344 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
Proposed Revision of
C457-08b
WK21346 Standard Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes
Proposed Revision of
D6434-04
WK21350 Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants
Proposed Revision of
F2579-06e1
WK21352 RELATIVE CORROSIVITY OF FUEL GRADE ETHANOL (Ed95) AND FUEL ETHANOL (Ed75 to Ed85) TO IRON IN THE PRESENCE OF WATER
WK21353 Standard Test Methods for Fire Testing of Components and Composites of Upholstered Furniture Using Flaming Ignition Sources
WK21355 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
Proposed Revision of
D2008-91(2006)
WK21358 Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes
Proposed Revision of
D1792-06
WK21359 Standard Test Method for Water Spotting of Emulsion Floor Polishes
Proposed Revision of
D1793-92(2008)
WK21360 Standard Practice for Evaluation of Spray-Buff Products on Test Floors
Proposed Revision of
D3758-95(2003)
WK21361 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
Proposed Revision of
D2047-04
WK21362 Standard Practice for Making and Curing Concrete Test Specimens in the Field
Proposed Revision of
C31/C31M-08a
WK21364 Using the Atmospheric Pressure Rotating Cage
WK21365 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)
Proposed Revision of
D3762-03
WK21366 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
Proposed Revision of
D3433-99(2005)
WK21367 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
Proposed Revision of
B86-06
WK21368 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
Proposed Revision of
D1876-01
WK21369 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
Proposed Revision of
D1062-02
WK21370 Standard Test Method for Tensile Properties of Adhesive Bonds
Proposed Revision of
D897-01e1
WK21371 Standard Practice for Building Floor Area Measurements for Facility Management
Proposed Revision of
E1836-08
WK21373 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
Proposed Revision of
D6509-00
WK21374 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
Proposed Revision of
E2619-08
WK21382 Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners
Proposed Revision of
D7349-08
WK21383 Making and Curing Self-Consolidating Concrete Test Specimens
WK21385 Polish Stripper Efficiency
WK21387 Polish Cleaner Efficiency
WK21388 Standard Test Methods for Rockwell Hardness of Metallic Materials
Proposed Revision of
E18-08a
WK21389 Standard Test Method for Brinell Hardness of Metallic Materials
Proposed Revision of
E10-07a
WK21390 Standard Test Method for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
Proposed Revision of
F483-08
WK21392 Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
Proposed Revision of
F1111-08
WK21393 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-07
WK21394 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
Proposed Revision of
C1077-07a
WK21395 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-07
WK21396 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
Proposed Revision of
F2215-05e2
WK21397 Standard Specification for Nuclear-Grade Boron Carbide Powder
Proposed Revision of
C750-03
WK21398 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-07
WK21399 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
Proposed Revision of
D6447-03
WK21400 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
Proposed Revision of
C989-06
WK21401 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
Proposed Revision of
C989-06
WK21402 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
Proposed Revision of
D4951-06
WK21403 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
Proposed Revision of
D5185-05
WK21414 Standard Specification for Hard-Drawn Copper-Clad Steel Wire
Proposed Revision of
B227-04
WK21417 Standard Guide for Selection of Standards on Environmental Acoustics
Proposed Revision of
E1433-04
WK21421 Standard Test Method for Determining Organic Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
Proposed Revision of
D5808-03
WK21422 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
Proposed Revision of
B228-04
WK21423 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
Proposed Revision of
B229-04
WK21425 Standard Test Method for the Determination of Lubricant Compatibility with Condoms
WK21428 Standard Test Method for Gum Content in Fuels by Jet Evaporation
Proposed Revision of
D381-04e1
WK21430 Standard Specification for Ready-Mixed Concrete
Proposed Revision of
C94/C94M-07
WK21431 Standard Terminology Relating to Surface Imperfections on Ceramics
Proposed Revision of
F109-04
WK21432 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
Proposed Revision of
F1252-08
WK21433 Standard Test Method for Determination of Total Sediment in Residual Fuels
Proposed Revision of
D4870-07a
WK21434 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
Proposed Revision of
D4952-02(2007)
WK21435 Standard Test Method for Sandwich Corrosion Test
Proposed Revision of
F1110-08
WK21439 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
Proposed Revision of
D3338-08
WK21440 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
Proposed Revision of
D2487-06e1
<